Leaflet D9 6000-TC "Combi"
16Pages

D9 6000-TC “Combi” – The sowing technology for optimum

High acreage output with small tractors The D9 6000-TC is an easy to operate and efficient trailed seed drill with RoTeC or RoTeC+ disc coulters on either 12.5 or 16.6 cm row spacing. Due to its easy pulling ability it is ideal for smaller tractors and smaller sized farms which do not want to lose out on efficiency. The drill features a trans- port width of 2.75 m and thus can be comfortably trans- ported from field to field. The precise metering of seed and fertiliser is carried out via two separate Vario gearboxes. Technical data Metering both seed and fertiliser 6 AMALOG+ operator...

Efficiency and precision in a 6 m working width The mechanical D9 “Combi” seed drill with a working width of 6 m has established itself successfully in the Russian market and is perfectly suited for mounting onto smaller tractors with little lifting power. The D9 6000-TC for the European market can be operated even by tractors from 80 HP. The 2,800 l capacity hopper can be divided into both seed and fertiliser compartments. Thanks to the integrated running gear, the machine is converted in just a few minutes into road transport mode with a transport width of 2.75 m. The D9 “Combi” is...

DLG Test report 5724F Test criteria Test result Calibration accuracy very good Lateral distribution very good Assessment range: ++/+/o/–/– – (o = default)

Correctly metered, your seed is worth its weight in gold! Metering of seed and fertiliser Seed metering via the Control seed wheels Metering system Control seed wheels The metering system for the D9 “Combi” has been further optimised with regard to delivery performance and lateral distribution. This is achieved by a combination of the 80 mm diameter Control seed wheel working in conjunction with the newly designed bottom flap and metering housing. The combination of fine seed wheel (orange) and normal seed wheel (green) allows the application of seed rates from 3 to 400 kg/ha without a seed...

Metering for seed and fertiliser Vario gearbox Metering of fertiliser and seed Metering and calibration of the highest precision through VarioControl Simultaneous fertilisation with the D9 “Combi” Via the infinitely variable, smoothly-running Vario gearbox, seed rates from 400 kg down to just 3 kg per hectare can be metered with the highest of precision. Needless to say that any seed type, such as rape, grass, cereals right through to peas and beans are also metered with that same degree of accuracy. An important innovation for many farms is the possibility to simultaneously apply...

Electronics for more precision! Sowing coulters, following harrow and loading board are all raised together and the metering is automatically switched off. The AMALOG+ operator terminal enables you to control the tramline rhythm and pre-emergence markers. The creation of tramlines is controlled via a sensor and the reprogramming to other tramline thythms is easily done. The display shows the working position of the track markers and the actual tramline rhythm; in addition, the area sown and the fill level of the seed or fertilier hopper is also monitored. AMALOG+ with electric tramling...

AMALOG+ operator terminal and track markers Robust track markers for the D9 “Combi” D9 “Combi” with Roller bar, track markers and GreenDrill 200 E catch crop seeder box in field operation Hydraulic rams switch over the track markers of the D9 “Combi” from its operational position up to the normal vertical position, allowing the drill to sow up to the field’s edge or for when negotiating obstacles. When switching over the track markers, the tramlining switchover goes on counting so that any tramlines are created in the desired rhythm. The track markers are protected by shear bolts against...

Seed embedment via the RoTeC Control disc coulters RoTeC Control coulters operate virtually wear-free. Even where large amounts of straw and trash prevail they won’t block up. The combination of the sowing disc on the one side and the furrow former on the other create the perfect seed furrow and optimum seed control. The elastic polyurethane disc also helps to create the seed furrow, accurately controls the pre-set sowing depth and prevents soil from sticking to the sowing discs. Sowing disc Control 25 depth guidance roller Furrow former For exceptionally deep sowing, the depth guidance...

RoTeC Control coulters Coulter pressure Roller pressure RoTeC: now proven by over 300,000 units! The very even and precisely controlled depth guidance of the RoTeC Control coulter is achieved via the Control 10 depth guidance disc, with a contact surface of 10 mm, or the Control 25 depth guidance option with a contact surface of 25 mm. As this depth guidance is fitted on the side of the coulter, this principle operates with more accuracy than coulter systems with a following, rigidly attached separate depth guidance press roller. The depth guidance discs or rollers provide the basic setting...

RoTeC+ Control (∅ 400 mm) ∅ with Control 25 depth guidance roller RoTeC Control (∅ 320 mm) ∅ ▼ 55 kg coulter pressure with Control 10 depth guidance disc RoTeC+ Control for the most ardous of operations For sowing operations on particularly large areas and in the most arduous of operational conditions, AMAZONE offers the RoTeC+ Control coulter. The disc diameter has been enlarged to 400 mm and is made from 4 mm thick, hardened boron steel. In this way, the wear is kept to a minimum and an already long service life is further extended. For trouble-free sowing at high forward speeds and in...

RoTeC+ Control coulters | Exact following harrow | Additional equipment Transport drawbar in the folded out postion for road transport The drawbar for road transport is folded in when sowing D9 “Combi” with Exact following harrow The end tow transport trailer With the aid of the optionally available end tow transport trailer, the machine can be quickly converted for road transport down to a transport width of 2.75 m with just a few quick-release handles. For road transport within the EU, a Cat. 2 or Cat. 3N lower link bar with a 50 mm diameter pulling eye as well as a fitting kit is...