Product Technical Data Sheet Ambic EasiFoamer™ AEF/002 Properties Enclosure & Pump Housing: ABS Motor/Gearbox: Metal, Copper & Acetyl PCB: Electronic Parts Spigots & Tubing: PVC & Santoprene Other Parts: Stainless Steel bracket & pins Flow rate: 400ml/minute Supply Voltage: 230V AC Running Current: 500mA Fuse: 1AT (5 x 20mm) Shield, Lance and Hook: 402-CB12 Polypropylene Gun Body & Lever and Connectors: HP500N Polypropylene Rollers and Retractable Coil: Nylon blend ‘O’ rings: EPDM Dimensions: 45 x 36 x 37 cm Net weight: 7.9 Kg Ambic Equipment Limited, 1 Parkside, Avenue Two, Station Lane, Witney, Oxfordshire, OX28 4YF, England Tel: +44 (0)1993 701935 Fax: +44 (0)1993 779039 Email: [email protected] Web: www.ambic.co.uk Fixing: 1.5m from floor level. Maximum lift for pump should not exceed

Product Technical Data Sheet Background Pre- and post-milking dairy hygiene is recommended for the pro-active control of Mastitis-associated pathogens. Whilst post-milking treatments have been effective at reducing the level of contagious mastitis, pre-milking treatment of cows’ teats has been found to reduce the risk of contamination and new infections, particularly those caused by environmental pathogens. Foam is particularly effective at loosening and lifting dirt and faecal matter from the teat as it is better at penetrating to the skin surface than liquid. The use of foaming chemicals also...

Product Technical Data Sheet Spare Parts The following parts can be ordered separately:                        AEF/003-2 – EasiFoamer™ Power Unit. AEF/002-100 – EasiFoamer™ Replacement PCB. ALP/100-12 – EasiFoamer™ 12V DC Motor. ALP/101-2 – EasiFoamer™ Peristaltic Pump Tube Set (Santoprene). ALP/102 – EasiFoamer™ Peristaltic Pump Spinner Assembly. ALP/103 – EasiFoamer™ Peristaltic Pump Block Assembly. ALP/115 – EasiFoamer™ Silicone Grease. AAF/004 – EasiFoamer™ Applicator Assembly. AAF/005 – EasiFoamer™ Compressed Air Regulator. AAF/006 – EasiFoamer™ Retractable Coil with...