Catalogs >
AP Machinebouw B.V. >
AP ROTOR PUMP

AP ROTOR PUMP
1Pages

Catalog excerpts

MACHINE CONSTRUCTION AGRICULTURE IRRIGATION EARTH MOVING AP ROTOR PUMP Hassle free pumps with high capacity at low cost The AP rotor pumps distinguish themself by a surprisingly simple design. This simplicity translates itself directly into a high capacity, a low power requirement and low operational costs. These qualities make the pumps ideal for use in civil engineering, for agricultural use etc. The AP rotor pumps are self-priming low pressure pumps to pump water. The machines are eminently suitable for e.g. irrigation or for the pumping out of ditches. The low power requirement enables a high efficiency in a short time with a relatively light tractor. By applying a special bearing construction and a complete splash lubrication the machine is almost free of maintenance. The steel grid at the suction side prevents damage by large obstacles. Stones, small pieces of wood etc. have no effect on the pump. The machines are supplied with a drainage tube of 406 mm; on this tube a ring is placed on which any adaptor can be mounted. Therefore any size hose or tube can be used. The discharge opening can be easily convert from left (standard) to right. The AP rotor pumps are standard equipped with a 3-point linkage (cat II). The AP rotor pumps are standard delivered in a thermal galvanized version. Next to the standard versions AP offers custom made dimensions and capacities as well. Technical specifications

Open the catalog to page 1

AP ROTOR PUMP 1Pages

Catalog excerpts

All AP Machinebouw B.V. catalogs and technical brochures

AP ROTOR PUMP
1Pages