PANEL SWITCHES 10400 series Professional pushbutton switches • threaded bushing Ø 10 mm DISTINCTIVE FEATURES Threaded bushing dia. 10 (.393) CECC approved Available with black finish ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : 3 A 24 VDC • Minimum load : 100 µA 10 mV • Initial contact resistance : 10 mΩ max. • Insulation resistance : 1,000 MΩ min. at 5 00VDC • Dielectric strength : 1,000 Veff. 50 Hz min. between terminals of the same pole 2,000 Veff. 50 Hz min. between terminals and frame 2,000 Veff. 50 Hz min. between terminals of adjacent poles • Electrical life : 50,000 cycles GENERAL SPECIFICATIONS • Torque : 1.50 Nm (1.106 Ft.lb) max. applied to nut • Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F) • Max. panel thickness : 3.5 mm (.138) MATERIALS • Case : diallylphthalate (DAP) • Actuator : brass, chrome plated • Bushing : brass, nickel plated • Housing : brass, nickel plated • Contacts : - silver - gold plated silver • Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to ch

Professional pushbutton switches • threaded bushing Ø 10 mm AGENCY APPROVAL CECC 96401-001 Availability : consult factory for details of approved models. Marking : to order switches marked CECC, add “CECC” to model number. PANEL CUT-OUT PANEL SWITCHES ELECTRICAL FUNCTIONS KEYWAY Single pole Double pole ABOUT THIS SERIES Complete part numbers are shown on the following page. Sealing boots are available to protect the switches against dust and water. See “Sealing boots“ section of website. Mounting accessories : standard hardware supplied with all models : 1 knurled nut, 1 hex nut, 1 locking ring...

Professional pushbutton switches • threaded bushing Ø 10 mm KEYWAY SOLDER LUG TERMINALS - SINGLE POLE Gold plated silver contacts Gold plated silver contacts Silver contacts SOLDER LUG TERMINALS - DOUBLE POLE A 1-2 5-4 Silver contacts Matt black finish : part numbers on request. AGENCY APPROVAL BASIC P/N CECC Blank CECC 96401-001 No agency approval required. Availability : consult factory for details of approved models. Marking : to order switches marked CECC, please complete above box with CECC. Order separately. For cap colors, replace last "0" by number : Blue Dark blue Black Green Grey Yellow...