PANEL SWITCHES 13000 series Professional quick-break momentary pushbutton switches DISTINCTIVE FEATURES PC and panel mount models Bushing Ø 6.35 (1/4) and 11.9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - silver contacts (A-AD2) : 4 A 30 VDC - gold plated contacts (CD) : 100 mA 30 V • Minimum load (AD2-CD contacts) : 10 mA 50 mV, 10 µA 5 V min. • Initial contact resistance : 10 mΩ max. • Insulation resistance : 1,000 MΩ min. at 5 00VDC • Dielectric strength : 1,000 Vrms 50 Hz min. between terminals 2,000 Vrms 50 Hz min. between poles and between terminals and frame • Contact bounce : 2 ms max. • Electrical life : Contacts Low level or mechanical life GENERAL SPECIFICATIONS • Torque : 1.25 Nm (.922 Ft.lb) max. applied to nut • Standard panel thickness : 2 mm (.078 ) max. • Total travel : 2 mm (.078) • Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F) The company reserves the right to change speci

Professional quick-break momentary pushbutton switches MATERIALS • Case : diallylphthalate (DAP) • Bushing : brass, nickel plated • Housing : brass, nickel plated • Contacts : A : silver AD2 : silver, gold plated (2 micron gold) CD : brass, gold plated • Actuator : brass, nickel plated ELECTRICAL FUNCTION • Terminal seal : epoxy Note : AD2 contacts can be used for high level applications.In this case, the gold layer is considered only as a protection against oxidation during storage. RELIABILITY - RUN-IN TEST 1 2 3 Upon request, each individual switch can be submitted to a low level run-in test...

Professional quick-break momentary pushbutton switches BUILD YOUR PART NUMBER BASIC PART NUMBER Straight PC terminals, bushing Ø 6.35 (1/4) Solder lugs, bushing Ø 6.35 (1/4) or 11.9 (15/32) Right angle terminals, bushing Ø 6.35 (1/4) Single pole Double pole ELECTRICAL FUNCTION Solder lugs or straight PC depending on model Right angle, horizontal mounting OPTIONS ORDER SEPARATELY. CONTACT MATERIALS Silver, gold plated (2 micron gold) Brass, gold plated SPECIAL OPTIONS Brass, nickel plated Black finish on bushing, plunger and hardware Reinforced sealing by three O-rings Bushing Ø 11.9 (15/32) +...

Professional quick-break momentary pushbutton switches KEYWAY Ø 6.35 BUSHING SOLDER LUG TERMINALS : 13400 Ø 6.35 BUSHING STRAIGHT PC TERMINALS : 13200 Single pole Ø 6.35 BUSHING RIGHT ANGLE TERMINALS Double pole With long plunger 13445 -9 X768 Chrome plated actuator. Switch guard available for this model : see “Switch guards“ section of website. 4 SEALED SWITCH WITH Ø 11.9 FLATTED BUSHING : X768 - SOLDER LUG TERMINALS Double pole With short plunger Single pole Single pole PANEL SWITCHES

Professional quick-break momentary pushbutton switches CONTACTS MATERIALS BASIC P/N Silver Silver, gold plated (2 micron gold) Brass, gold plated PLUNGERS Dash compulsory before plunger code. Blank Standard plunger for Ø 6.35 (1/4) bushing -4 4 mm (.157) long plunger for Ø 11.9 (15/32) bushing (X768 option) -9 9 mm (.354) long plunger for Ø 11.9 (15/32) bushing (X768 option) FINISH BASIC P/N Blank Bright chrome finish G Black finish on bushing, actuator and hardware SEALING K Front panel sealing by one O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands...

Professional quick-break momentary pushbutton switches AGENCY APPROVALS BASIC P/N CECC 96401-001 No agency approval required. Availability UL : all models with silver or gold plated silver contacts CECC : consult factory for details of approved models. Marking To order switches marked UL or CECC, please complete above box with desired approval. Order separately The caps below are for Ø 4 mm plungers (standard and -9), except U2600. Cap colours Replace last "0" by number : 1 Blue 1/4 Dark blue 2 Black 3 Green 4 Grey 5 Yellow 6 Red 7 Ivory 7/1 White 9 Orange PANEL SWITCHES