PANEL SWITCHES 1400N series Momentary pushbutton switches • snap-in mounting • square plunger DISTINCTIVE FEATURES Butt action contacts, double break Solder lug, straight PC and quick-connect terminals ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - silver contacts (A) : 6 A 12 VDC - silver plated copper contacts (C) : 3 A 12 VDC • Initial contact resistance : 10 mΩ • Insulation resistance : 1,000 MΩ min. at 500 VDC • Dielectric strength : 1,500 Vrms 50 Hz min. between terminals 2,000 Vrms 50 Hz min. between terminals and metal panel • Electrical life : 10,000 cycles at full load GENERAL SPECIFICATIONS • Panel thickness : 2 mm (.078) max. • Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F) MATERIALS • Case : polyamide • Plunger : polyamide • Contacts : A : silver C : gold plated silver APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change speci

Momentary pushbutton switches • snap-in mounting • square plunger PANEL CUT-OUT ELECTRICAL FUNCTIONS PANEL SWITCHES

Momentary pushbutton switches • snap-in mounting • square plunger BUILD YOUR PART NUMBER BASIC PART NUMBER ELECTRICAL FUNCTIONS CONTACT MATERIALS PLUNGER COLORS Copper, silver plated ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to following pages for further information. 3 PANEL SWITCHES

Momentary pushbutton switches • snap-in mounting • square plunger 18.00 (.708) Normally Open Normally Closed Normally Open Normally Closed CONTACT MATERIALS BASIC P/N Silver Copper, silver plated Normally Open Normally Closed PANEL SWITCHES

Momentary pushbutton switches • snap-in mounting • square plunger PLUNGER COLORS BASIC P/N Black (standard) Green Red Ivory Switch frame supplied in black. PANEL SWITCHES