PANEL SWITCHES 600H-600NH series Toggle switches • high amperage DISTINCTIVE FEATURES Robust mechanism High current/voltage rating Insulated or metal lever UL, CSA and NF-VDE (EN 61058-1) approved ELECTRICAL SPECIFICATIONS • Max. current/voltage ratings : see tables below • Peak current : 30 A max. during 1/2 sine, 250 VAC • Initial contact resistance : 10 mΩ max. • Insulation resistance : 1,000 MΩ min. at 500 VDC • Dielectric strength : 2,000 Vrms 50 Hz min. between terminals 2,500 Vrms 50 Hz min. between terminals and frame • Electrical life : 10,000 cycles at full load APPROVED RATINGS 600H - 600NH Models ON - OFF (1) Single and double pole Three pole FOR INFORMATION Max. current/voltage rating w. resistive load Functions Electrical life The company reserves the right to change specifications with

PANEL SWITCHES 600H-600NH series Toggle switches • high amperage GENERAL SPECIFICATIONS • Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut • Panel thickness : 4.5 mm (.177) max. between 2 nuts • Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F) • Case : polyester UL94-V0 • Actuator : - 600H : brass, nickel plated - 600NH : black polyamide ELECTRICAL FUNCTIONS • Bushing : brass, nickel plated or zinc die-cast (zamak) • Contacts : silver/nickel alloy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. AGENCY APPROVALS Availability : see chart...

Toggle switches • high amperage BUILD YOUR PART NUMBER BASIC PART NUMBER Single pole ELECTRICAL FUNCTIONS Metal lever, screw terminals Metal lever, solder lug/quickconnect terminals * Metal lever, normalized quick-connect terminals Insulated lever, screw terminals Double pole Three pole Insulated lever, solder lug/ quick-connect terminals Insulated lever, normalized quick-connect terminals * Must not have blank in "momentary" box. OPTIONS FOR 600H SERIES ONLY LOCKING LEVERS OPTIONS For models with metal lever only ACTUATOR OPTIONS Tropicalized case Front panel sealing Retro style actuator Chrome...

Toggle switches • high amperage A = Angle of throw METAL LEVER - SINGLE POLE ON Angle of throw with K sealing option : functions 1, 5, 6, 7 : 26° - functions 8, 9 : 32° * Function 4 : SP in DP case - see "Technical information" on website KEYWAY INSULATED LEVER - SINGLE POLE METAL LEVER - THREE POLE METAL LEVER - DOUBLE POLE

Toggle switches • high amperage KEYWAY * Function 4 : SP in DP case - see "Technical information" on website KEYWAY INSULATED LEVER - THREE POLE INSULATED LEVER - DOUBLE POLE All models also available with normalized quick-connect terminals H/3 or NH/3. For 600H series only T Tropicalized diallylphthalate case (-40 °C to +85 °C) (-40 °F to +185 °F) K Front panel sealing by 1 O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed even when switch is operated Special threaded bushing, length 16 mm (.629) Chrome plated lever...

Toggle switches • high amperage LOCKING LEVERS BASIC P/N For 600H series only For 1 and 2 pole models. For 3-pole models, refer to 6000 series. ACTUATOR OPTIONS BASIC P/N For 600H series only For 1 and 2 pole models. Ø6.00 (.236DIA) -4 30 mm (1.181) long actuator -5 40 mm ( 1.574) long actuator -6 Retro style actuator (gold plated or chrome plated : on request) X2595 Ergonomic flat plastic actuator PANEL SWITCHES