PANEL SWITCHES 660 series Power toggle switches • metal lever DISTINCTIVE FEATURES Four pole models High current/voltage rating Screw terminals ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : 10 A 30 VDC • Decrease by 50 % for inductive load • Initial contact resistance : 10 mΩ max. • Insulation resistance : 1,000 MΩ min. at 500 VDC • Dielectric strength : 2,500 Vrms 50 Hz min. between terminals 2,500 Vrms 50 Hz min. between terminals and frame • Electrical life : 10,000 cycles at full load GENERAL SPECIFICATIONS • Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut. • Panel thickness : 4.5 mm (.177) max. • Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F) MATERIALS • Case : melamine/polyester • Actuator : brass, nickel plated • Bushing : brass, nickel plated • Contacts silver The company reserves the right to change s

Power toggle switches • metal lever PANEL CUT-OUT Screw ( standard) PANEL SWITCHES

Power toggle switches • metal lever BUILD YOUR PART NUMBER BASIC PART NUMBER ELECTRICAL FUNCTIONS Four pole TERMINAL OPTIONS Screw terminals (standard) Quick-connect terminals OTHER OPTIONS Tropicalized case Chrome finish Front panel sealing + T and LUXE Black finish Black finish + front panel sealing ABOUT THIS SERIES On the following page, you will find successively basic part numbers of switches and options. ounting accessories : Standard hardware supplied with all models: 1 hex nut U166, 1 knurled nut U411 and 1 lockwasher U13. Standard M and special hardware is presented in the "Accessories"...

Power toggle switches • metal lever FOUR POLE * See "Technical information" on website. Screw terminals (standard) PANEL SWITCHES LOCKING LEVERS BASIC P/N Tropicalized diallylphthalate case (-40 °C to +85 °C) (-40 °F to +185 °F) Chrome plated lever and cap nut U117 T and LUXE + front panel sealing by O-ring and sealing washer. See 600H series. G Black finish on bushing, lever and nuts. Includes tropicalization (option T). Option G + front panel sealing by O-ring and sealing washer.