Catalogs >
APEM GmbH >
AV series

AV series
5Pages

Catalog excerpts

PANEL SWITCHES Security pushbutton switches suitable for 250 VAC • approved according to EN 61058-1 DISTINCTIVE FEATURES Mains switches approved to EN61058-1 Ø 16 (.629), 19 (.748) and 22 mm (.866) Latching Three terminal types ENVIRONMENTAL SPECIFICATIONS • Optional front panel sealing : IP65 according to IEC 60529 • Operating temperature : -30 °C to +70 °C(-22 °F to +158 °F) ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : 1 A 250 VAC • Initial contact resistance : 50 mΩ max. • Insulation resistance : 1,000 MΩ min. at 500 VDC • Dielectric strength : 2,000 Vrms 50 Hz min. between terminals 500 Vrms 50 Hz between terminals and frame • Electrical life : 10,000 cycles at 1 A 250 VAC GENERAL SPECIFICATIONS • Torque : 1.5 Nm min. - 4 Nm max. applied to nut • Panel thickness : Ø 16 : 1 (.039) to 6 mm (.236) max. Ø 19 and Ø 22 : 1 (.039) to 9 mm (.354) max. • Low level or mechanical life : 200,000 cycles • Hand soldering : 300 °C (572 °F), 4 sec. max. MATERIALS • Case : PA4-6, UL94-V0 • Contacts : silver (A) • Bushing & actuator : see following pages APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to

Open the catalog to page 1

PANEL SWITCHES AV series Security pushbutton switches suitable for 250 VAC • approved according to EN 61058-1 AGENCY APPROVAL EN61058-1 1A 250 VAC All models marked ELECTRICAL FUNCTIONS

Open the catalog to page 2

Security pushbutton switches suitable for 250 VAC • approved according to EN 61058-1 BUILD YOUR PART NUMBER BASIC PART NUMBER ACTUATOR TYPES BUSHING/ACTUATOR MATERIALS Nickel plated brass / Nickel plated brass Nickel plated brass / Stainless steel Stainless steel / Stainless steel ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice: please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories: standard...

Open the catalog to page 3

Security pushbutton switches suitable for 250 VAC • approved according to EN 61058-1 Hex nut 19 (.748) across flats Ø 16 (.629) - FLAT OR CURVED ACTUATOR SOLDER LUG TERMINALS Ø 19 (.748) - FLAT OR CURVED ACTUATOR SOLDER LUG TERMINALS Curved actuator Product shown in OFF position. Curved actuator Flat actuator Product shown in OFF position. Ø 22 (.866) - FLAT OR CURVED ACTUATOR SOLDER LUG TERMINALS Curved actuator Flat actuator Product shown in OFF position. QUICK-CONNECT TERMINALS Replace 2 with 4 at the end of the model numbers shown above. CAV16COPC PANEL SWITCHES Replace 2 with 8 at the...

Open the catalog to page 4

Security pushbutton switches suitable for 250 VAC • approved according to EN 61058-1 BUSHING/ACTUATOR MATERIALS BASIC P/N Nickel plated brass Nickel plated brass Nickel plated brass Stainless steel Stainless steel Stainless steel No sealing Front panel sealing to IP65 - elastomeric membrane - external gasket PANEL SWITCHES

Open the catalog to page 5