Controlmec™ 1ZW
16Pages

Round front panel sealed solution • for navigation unit • illumination option DISTINCTIVE FEATURES Round Ø29.5 mm h=12.3 mm Front panel sealing to IP67 One piece navigational cap Single components or a complete module SWITCH SPECIFICATIONS : see Multimec™ 5 series. The company reserves the right to change specifications without notice. All tolerance if

Controlmec™ 1ZW Round front panel sealed solutions • for navigation unit • illumination option CONNECTOR INFORMATION PANEL CUT-OUT Connectors on the module are Molex picoflex series 90816-0320 for switches and 90816-0316 for additional LEDs. We recommend using: Cable socket: 90327-0320 for switches and 903270316 for additonal LEDs. CIRCUIT DIAGRAMS SW4 ANODE SW4 CONTACT SW4 CONTACT SW4 CATHODE SW5 ANODE SW5 CONTACT SW5 CONTACT SW5 CATHODE SW1 ANODE SW1 CONTACT SW1 CONTACT SW1 CATHODE SW3 ANODE SW3 CONTACT SW3 CONTACT SW3 CATHODE SW2 ANODE SW2 CONTACT SW2 CONTACT SW2 CATHODE

Round front panel sealed solutions • for navigation unit • illumination option BUILD YOUR PART NUMBER SINGLE PARTS surface mount ACTUATION FORCE high intensity green frosted white LEGEND TYPE* COLOR illuminated hard paint laser marked LEGEND* edge ACTUATION FORCE LEGEND TYPE* high intensity green hard paint laser marked frosted white LEGEND* edge NOTICE : please note that not all combinations of above numbers are available. Contact APEM for further information. MATERIALS • Cap : - solid color : ABS UL94HB - illuminated : polycarbonate UL94HB

Legends Available for Multimec caps STANDARD LEGENDS STANDARD LEGENDS 10Q_ 10QM16_ START RESET STANDARD OPTIONS • 10A: pad printed / laser marked • 10C: pad printed / laser marked • 1ZB: pad printed / laser marked • 10D: UV printed / laser marked • 1ZCS: pad printed / *reverse printed / *laser marked • 10R(F) & 10Q: pad printed / reverse printed • 1Z & 1ZW: pad printed / laser marked

Available for Multimec caps HOW TO ORDER POSITIONING OF LEGENDS ON ROCKER-ACTION CAPS LEGEND ILLUMINATION • Option 1 - laser marked: In case of laser marked legends an “LM” is added after the cap colour, before the legend code. We recommend using hard paint (additional “H” ) for increased lifetime of the paint. E.g. 1ZB16DLMH13609 When ordering legends for caps with hinge-type cap retention system, it is important to note the position of the cap. An extra letter (U, D, R or L) needs to be added to the part number to refer to the position of the hinges in relation to the legend. See samples:...

The RAL Codes mentioned are the codes nearest to the solid colors in the multimec™ range. Metal dark grey / No ral code Metal light grey / No ral code Metal dark blue / No ral code

■ Designed for 5G cap retention system ■ Stackable, giving the possibility to match most overall heights ■ h =5-10 mm ■ Material: Nylon Extender for 5G cap range Range: Extender 5Grange cap range 5G + caps Extender Extender for■ Temp. 5Gfor cap 5G + Extender 2SS 2SS Multimec™ • Switch: -40/+160°C • LED: -30/+85°C ■ Designed for 5G cap retention system • Solid keycap: -40/+65°C ■ Designed for 5G cap retention system giving the possibility to match most overall ■ Designed for 5G cap retention system • Transparent keycap: -40/+85°C ■ Stackable, ACCESSORY SPECIFICATIONS All dimensions in mm...

Cap & Bezel Specifications Multimec™ caps HOW TO ORDER EXTENDERS ACTUATION FORCE CAP See the table on the previous page Surface mount

High performance tactile switches • MIL-PRF-28855H • excellent illumination DISTINCTIVE FEATURES Large range of accessories Momentary switches with NO or NC/NO function Sealed to IP67 Single or bi-color illumination option Illumination with integrated chip-LEDs ENVIRONMENTAL SPECIFICATIONS • Sealing : IP67 according to IEC 60529 • Working and storage temperature : - non-illuminated: -40 °C/+160 °C (-40 °F to +320 °F) - illuminated: -30 °C/+85 °C (-22 °F to +185 °F) • Soldering : - through-hole : IEC 60068-2-20 8 - surface mount : JEDEC J-STD-020E ELECTRICAL SPECIFICATIONS • Recommended load...

High performance tactile switches • MIL-PRF-28855H • excellent illumination RAS • SMD, TH or right angle TH • NO or NC/NO • SMD or TH • NO • single or bi-color LEDs All tolerances unless otherwise noted : ±0.2 mm PCB LAYOUT & CIRCUIT DIAGRAM NC/NO function

High performance tactile switches • MIL-PRF-28855H • excellent illumination BUILD YOUR PART NUMBER ILLUMINATED ACTUATION FORCE Surface mount High intensity Green Quiet contact (with 2.0 N only) Tape & reel (with SMD only) Gold contacts ACTUATION FORCE Surface mount Quiet contact (with 2.0 N only) Right angle (with TH only) Normally closed/ normally open function (with 3.5 N only) Tape & reel (with SMD only) Gold contacts ABOUT THIS SERIES Laser marking on the switch for identification : WWYS, WW=week, Y=year, S=suffix for the type of switch, e.g. P=2.0 N and silver contacts, S=3.5 N and...

Multimec™ 5G High performance tactile switches • MIL-PRF-28855H • excellent illumination TAPE & REEL Tape and reel is available for the parts listed and has the following specifications ORDERING CODE • Tape and reel material: antistatic or better • Quantity per reel: see list

High performance tactile switches • MIL-PRF-28855H • excellent illumination MOUNTING MOUNTING TOOLS FOR MULTIMEC™ THROUGH-HOLE SWITCHES SPACE REQUIREMENT - MATRIX MOUNTING MULTIMEC™ SPACING EXAMPLES

Multimec™ 5G High performance tactile switches • MIL-PRF-28855H • excellent illumination MOUNTING (CONTINUED) SPACE REQUIREMENT - SWITCH/CAP Cap dimensions Switch spacing Panel cut-out RECOMMENDED MIN.SWITCH SPACING AxB RECOMMENDED MIN. PANEL CUT-CUT

High performance tactile switches • MIL-PRF-28855H • excellent illumination LED COMPONENT SPECIFICATIONS LED COMPONENT SPECIFICATIONS Color High Intensity Green Color Codes ABSOLUTE MAXIMUM RATINGS (Ta= 25°C) Power Current forward Forward peak current Voltage reverse Operating temperature Storage temperature Soldering temperature ELECTRICAL-OPTICAL CHARACTERISTICS (Ta=25 °C) Voltage forward Wave length Spread angle Luminous Intensity Optical intensity */F=20 mA, **Pulse width 1ms Duty cycle 1:5, ***/F=50 mA, ****Luminous Flux mlm