FP series Panl Switches

Product catalog summary

LED Component Specifications
The document outlines the specifications for various LED colors used in panel switches. Each LED color has a specified forward current of 20 mA, with typical and maximum forward voltages provided. For example, blue and white LEDs have a typical forward voltage of 3.3 V and a maximum of 4 V, while red LEDs have a typical forward voltage of 1.9 V and a maximum of 2.5 V. A resistor must be series-connected by the user, calculated using the formula: Resistor value = (supply voltage - LED forward voltage) / LED forward current.

Electrical Specifications
The switches have a maximum current/voltage rating with resistive load, with silver contacts rated at 4 A 12 VDC and gold-plated contacts at 200 mA 12 VDC. Initial contact resistance is 50 mΩ max, insulation resistance is 1 GΩ min at 500 VDC, and dielectric strength is 1,000 Vrms 50 Hz min. Electrical life varies by model, with momentary models lasting up to 1 million cycles for gold-plated contacts and 400,000 cycles for silver contacts, while latching models last 200,000 cycles.

Distinctive Features
The switches feature a threaded bushing, full actuator or symbol illumination, and are large yet lightweight. They are sealed to IP69K standards and can have pad printed or laser etched symbols.

Environmental Specifications
The switches are sealed to IP69K according to DIN 40050-9, with optional back panel sealing to IP67. They operate in temperatures ranging from -40 °C to +75 °C (-40 °F to +167 °F).

General Specifications
The FP series includes fully illuminated pushbutton switches with a bushing diameter of 24 mm, available in momentary or latching models. Panel thickness ranges from 1 mm to 18 mm, with a total travel of 2.5 mm ± 0.5 mm and a typical operating force of 8 N ± 2 N. The switches have a mechanical life of up to 1 million cycles for momentary models and 200,000 cycles for latching models.

Materials
The case is made of PA46, the actuator of PA12, and the bushing/bezel of PA66. Contacts are available in silver or silver with gold plating. The cable length is 300 mm, with the section depending on the switch model. Terminal seals are made of epoxy or overmolding.

Wiring Diagram and Symbols
The document includes wiring diagrams and a comprehensive list of symbols for fully illuminated pushbutton switches, adhering to ISO 7000 standards for graphical symbols on equipment.

Catalog excerpts

PANEL SWITCHES FP series Fully illuminated pushbutton switches • bushing Ø 24 mm • momentary or latching DISTINCTIVE FEATURES Threaded bushing Full actuator or symbol illumination Large but lightweight Sealed to IP69K Pad printed or laser etched symbols ENVIRONMENTAL SPECIFICATIONS • Front panel sealing : IP69K according to DIN 40050-9 • Optional back panel sealing : IP67 • Operating temperature : -40 °C to +75 °C (-40 °F to +167°F) ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - silver contacts (code 2) : 4 A 12 VDC - gold plated contacts (code 4) : 200 mA 12 VDC • Initial contact resistance : 50 mΩ max. • Insulation resistance : 1 GΩ min. at 500 VDC • Dielectric strength : 1,000 Vrms 50 Hz min. • Electrical life at full load : - Momentary models : 1 million cycles (gold plated contacts) 400,000 cycles (silver contacts) - Latching models : 200,000 cycles LED COMPONENT SPECIFICATIONS LED color Forward current A resistor must be series-connected by the user Resistor value = supply voltage - LED forward voltage The company reserves the right to change specific

Open the catalog to page 1

PANEL SWITCHES FP series Fully illuminated pushbutton switches • bushing Ø 24 mm • momentary or latching PANEL CUT-OUT GENERAL SPECIFICATIONS • Panel thickness : 1(.039) to 18 mm (.708) max. • Total travel : 2.5 mm ± 0.5 mm • Typical operating force : 8 N ± 2 N • Low level or mechanical life : - Momentary models : 1 million cycles - Latching models : 200,000 cycles MATERIALS • Case : PA46 • Actuator : PA12 WIRING DIAGRAM FICHIER: CFPDEC-P4 ECHELLE: 0.625 indice A le 19/01/11 • Contacts : silver (code 2) or silver, gold plated (code 4) • Cable : length 300 mm, section depending on switch model...

Open the catalog to page 2

Fully illuminated pushbutton switches • bushing Ø 24 mm • momentary or latching BUILD YOUR PART NUMBER BASIC PART NUMBER ELECTRICAL FUNCTIONS Round, flat Solder lugs Round, curved Straight cable Round, curved, flush Right angle cable, Straight cable IP67 back panel sealing Independent, 1 pole, dimming LED (Function 1 only) Output indicator, 1 pole (Function 1 only, cable only) ACTUATOR COLORS BEZEL COLORS Silver, gold plated ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note...

Open the catalog to page 3

Flat actuator Flat actuator Flat actuator STRAIGHT CABLE TERMINALS IP67 BACK PANEL SEALING LATCHING Curved actuator Flat actuator Flat actuator Curved actuator Curved actuator RIGHT ANGLE CABLE TERMINALS Flat actuator Curved actuator Curved actuator STRAIGHT CABLE TERMINALS Flat actuator Curved actuator Curved actuator Flat actuator Curved actuator Fully illuminated pushbutton switches • bushing Ø 24 mm • momentary or latching PANEL SWITCHES To order a product, replace • with one of the codes selected under “LED control and numbe

Open the catalog to page 4

Fully illuminated pushbutton switches • bushing Ø 24 mm • momentary or latching LED CONTROL AND NUMBER OF POLES Complete the model numbers on previous pages with one of the following codes. Function 1 (latching) Non-illuminated one pole A Independent one pole Dimming LED E Output indicator, one pole Cable only F FICHIER: CFPSH-P5 ECHELLE: 0.625 FICHIER: CFPSH-P5 indice A ECHELLE: 0.625 le 19/01/11 indice A le 19/01/11 dotted line = jumper to be wired by the user. LED- has to be wired to one pin of pole 2. FICHIER: CFP30SH-P4 ECHELLE: 0.625 indice A le 03/03/2014 CONTACT MATERIALS BASIC P/N Silver...

Open the catalog to page 5

PANEL SWITCHES FP series Fully illuminated pushbutton switches • bushing Ø 24 mm • momentary or latching BEZEL COLORS BASIC P/N Blue Black Green Grey Non-illuminated Blue Green Red Yellow Red/green Red/blue No resistor supplied 12 VDC resistor 24 VDC resistor 15 VDC resistor 30 VDC resistor MARKING BASIC P/N No marking Black pad printing White pad printing Laser Available symbols Complete the enlarged box with the one of the codes listed on the following pages. MARKING AREA FLAT Ø (.6 16 30 .00 DI A) Marking color White marking for illuminated actuators (laser etching) and non-illuminated black...

Open the catalog to page 6

PANEL SWITCHES FP range Symbols for fully illuminated pushbutton switches Most symbols meet the ISO 7000 standard “graphical symbols for use on equipment” (code given in bracket in the description). Contact us for symbols not featured in the following tables. Revolving light Emergency first aid vehicle (2565) Rear ventilator Door opening Windshield demister/ defroster (0635) Combine, direction of movement (1678) Working spot light (1145) Side mirror defroster Restarting pump Down motion Taxi sign light (2551) Propulsion system trim Working light symmetric (1204) Traveller lighting

Open the catalog to page 7

PANEL SWITCHES FP range Symbols for fully illuminated pushbutton switches Engine idle control ECAS reset Cruise res/set Driver windows heating Driver windows up/ down Middle door opening Front door opening Read lighting Lighting in baggage room Lighting main switch Rear window wiper (0097) Cruise on/off Heating using water Rear window washer (0099) Position lights Diesel acceleration Toilet decontamination Manual mode Front windshield heating Clockwise cabin rotation Anticlockwise cabin rotation Rockshaft down Remove retarder Restricted speed Brake release Baggage room left door ECAS detection...

Open the catalog to page 8

Symbols for fully illuminated pushbutton switches Battery charging condition (0247) Differential lock, bogie (2600) Brushing with a rotating brush (0070) Differential lock, transfer case 4x4 (2475) Loader bucket, float (1441) Rear window washer & wiper (0098) Header, Header drive (1579) Excavator/backhoe boom side shift (2091) Chemical water treatment (1851) Legend scale Depending on space available on the product (see “Symbols” section at the end of each series). Grapple skidder, single funct° boom (1762) PANEL SWITCHES

Open the catalog to page 9