Catalogs >
APEM GmbH >
IG series

IG series
7Pages

Catalog excerpts

PANEL SWITCHES Pushbutton switches for joystick application • bushing Ø 12 mm • momentary NO DISTINCTIVE FEATURES Last minute snappable plunger Strong tactile feedback Different voltages for LED backlight ENVIRONMENTAL SPECIFICATIONS • Operating and storage temperature: -40 °C to +85 °C (-40 °F to +185 °F) • Front panel sealing: - IP67 according to IEC 60529 - IP69K according to DIN 40050-9 • Salt spray: IEC60068-2-11 test Ka (96h) ELECTRICAL SPECIFICATIONS • Electrical function: Momentary • Max. current/voltage rating with resistive load: - Gold plated contact (0): 50 mA 28 VDC, 1,000,000 cycles - Silver contact (1): 2 A 28 VDC, 100,000 cycles • Dielectrical strength: 1500 Vrms between terminals • Initial contact resistance: 100 mOhms max • Insulation resistance: 1 Gohms at 500 VDC GENERAL SPECIFICATIONS • Total travel: 2 mm ± 0.4 mm • Typical operating force: 9 N ± 2N • Maximum applicable force: 50 N in all axes • Hand soldering with lead-free alloy solder wire type SAC 305 (flux amount 2,2%): temperature 337-381°C. Standard application time is 3s. • Mechanical life: 1,000,000 cycles The company reserves the right to chan

Open the catalog to page 1

PANEL SWITCHES IG series Pushbutton switches for joystick application • bushing Ø 12 mm • momentary NO MATERIALS • Case: Thermoplastic, UL94-V0 • Actuator: ABS UL94-Hb • Bushing: Thermoplastic • Membrane: fluorinated silicone, black • Contacts: - 0: brass, gold plated - 1: silver • Output wires: 15mm long 24AWG for LED version only PANEL MOUNTING • Panel thickness: 1.5 to 5.5 mm • Torque: 0.55 Nm applied to nut • Panel cut-out: ELECTRICAL DIAGRAMS

Open the catalog to page 2

Pushbutton switches for joystick application • bushing Ø 12 mm • momentary NO BUILD YOUR PART NUMBER BASIC PART NUMBER CONTACT MATERIAL Gold plated Plunger alone* Threaded bushing * Jump to actuator option Solder lugs ACTUATOR OPTIONS MARKING TECHNO Blank no actuator ACTUATOR COLORS Blank no actuator MARKING COLOR Blank no actuator MARKING ORIENTATION Blank no actuator Dark blue MARKING CODE Blank no marking 3 digit see codes on page 7 ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Mounting...

Open the catalog to page 3

PANEL SWITCHES IG series Pushbutton switches for joystick application • bushing Ø 12 mm • momentary NO SOLDER LUG TERMINALS NON-ILLUMINATED - NO SOLDER LUG TERMINALS ILLUMINATED - NO CONTACT MATERIAL Brass, gold plated Silv

Open the catalog to page 4

Pushbutton switches for joystick application • bushing Ø 12 mm • momentary NO Non-illuminated Red Yellow Green Blue White Red/green MARKING TECHNOLOGY BASIC P/N No actuator No marking Hot stamping Laser ***CAPS Can be ordered separately, begin part number with IGA and follow the codification guide from here.*** ACTUATOR COLORS BASIC P/N No actuator Blue Dark blue Black Green Grey Yellow Red White Orange 5 PANEL SWITCHES

Open the catalog to page 5

PANEL SWITCHES Pushbutton switches for joystick application • bushing Ø 12 mm • momentary NO MARKING COLOR BASIC P/N No actuator Black White • • MARKING ORIENTATION

Open the catalog to page 6

Pushbutton switches for joystick application • bushing Ø 12 mm • momentary NO ACTUATOR COLORS BASIC P/N Logo Dimension Most symbols meet the ISO 7000 standard “graphical symbols for use on equipment” (code given in bracket in the description). Contact us for symbols not featured in the following table Please note that all these symbols may not already exist as standard and could increase the lead time of the first order. CODE Loader bucket, float (1441) Illuminated ring Symbol ‘IDLE’ Symbol ‘Power’

Open the catalog to page 7