IP series
5Pages

PANEL SWITCHES Pushbutton switches for harsh environments • bushing Ø 12 mm • latching DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS • Front panel sealing : IP67 according to IEC 60529 • Shock resistance : 100 g according to IEC 512-4, test 6c • Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d • Salt spray : IEC 512-6, test 11f • Robustness (non-illuminated) : IK06 according to EN 62262 (1 joule) • Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F) ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load: 4 A 12 VDC, 200,000 cycles 1 A 48 VDC, 200,000 cycles For W terminals, current has 2 A 48 VDC, 100,000 cycles to be limited to 400 mA. 3 A 48 VDC, 75,000 cycles 1 A 72 VDC, 15,000 cycles • Initial contact resistance : 100 mΩ max. • Insulation resistance : 1 GΩ min. at 500 VDC • Dielectric strength : 1,500 Vrms between terminals 1,000 Vrms between terminals and frame LED COMPONENT SPECIFICATIONS LED color Forward current A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage The company reserves the right to change spec

Pushbutton switches for harsh environments • bushing Ø 12 mm • latching GENERAL SPECIFICATIONS • Total travel : 2.5 mm (.098) ± 0.3 mm • Low level/mech. life : 200.000 cycles • Torque : 1.5 Nm max. applied to nut • Typical operating force : 10 N ELECTRICAL FUNCTION • Actuator : polyamide 6/6 • Bushing/bezel : zinc die-cast (zamak), black painted • Contacts : silver, gold plated • Output wires (flying lead terminals) : F version : AWG20, section 0.6 mm2 W version : AWG24, section 0.23 mm2 • LED wires : F version : AWG26, section 0.12 mm2 W version : AWG24, section 0.23 mm2 PANEL CUT-OUT •...

Pushbutton switches for harsh environments • bushing Ø 12 mm • latching BUILD YOUR PART NUMBER BASIC PART NUMBER ELECTRICAL FUNCTION ACTUATOR SHAPES Solder lugs Round, curved Flying leads, standard Round, flat Flying leads, thin Actuator marking available on round flat models (symbol 10 mm max.). On request. Silver, gold plated Dark blue ACTUATOR COLORS Satin chrome bezel Bright chrome bezel (round only) High actuator (non-illum. round models only) Consult factory for detail of approved models. Bright chrome Satin chrome ABOUT THIS SERIES On the following pages, you will find successively...

Pushbutton switches for harsh environments • bushing Ø 12 mm • latching All drawings with standard flying lead terminals. For THIN flying leads, replace F with W. Also available with straight PC : IPC1PAD or quick-connect terminals : IPC1Z1AD. Wire colors : black : contact, red : LED anode(+), blue : LED cathode(-) FLAT ø12.00 (.472DIA) For THIN flying leads, replace F with W. Also available with straight PC : IPR1PAD or quick-connect terminals : IPR1Z1AD. Wire colors : black : contact, red : LED anode(+), blue : LED cathode(-) For THIN flying leads, replace F with W. Also available with...

Pushbutton switches for harsh environments • bushing Ø 12 mm • latching ACTUATOR COLORS BASIC P/N Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome Non-illuminated Super red Yellow Green Blue OPTIONS 100 Satin chrome bezel 101 Bright chrome bezel (round only) 104 High actuator - For round, non-illuminated only AGENCY APPROVAL BASIC P/N UL Consult factory for details of approved models. To order switches marked UL, complete above box with ”UL”. PANEL SWITCHES