PANEL SWITCHES Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS • Front panel sealing: IP67 according to IEC 60529 IP69K according to DIN 40050-9 (non-illuminated) with cap U5125 • Shock resistance: 100 g according to IEC 512-4, test 6c • Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d • Salt spray: IEC 512-6, test 11f • Robustness (non-illuminated): IK06 according to EN 62262 (1 joule) • Operating temperature: -40 °C to +85 °C (-40 °F to +185 °F) ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load (gold plated silver contacts): 5 A 28 VDC, 70,000 cycles (only function 3) For W terminals, current has 0.2 A 48 VDC, 500,000 cycles to be limited to 400 mA. 0.5 A 48 VAC, 500,000 cycles • Initial contact resistance: 100 mΩ max. • Insulation resistance: 1 GΩ min. at 500 VDC • Dielectric strength: 1,500 Vrms • Contact bounce: 10 ms LED COMPONENT SPECIFICATIONS LED color Forward current A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage The company reserves the right to change sp

Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary GENERAL SPECIFICATIONS • Panel thickness: 1.5 mm (.059) min. 4 mm (.157 max.) TERMINALS ILLUMINATED MODELS • Total travel: Function 3: 1.7 mm (.067) ± 0.3 mm (0.012) Function 5: 1.3 mm (.051) ± 0.3 mm (0.012) • Typical operating force: 4 N ± 2 N • Low level/mech. life: 1,000,000 cycles • Torque: 1.5 Nm max. applied to nut NON-ILLUMINATED MODELS CIPCOSP CIPCOSP ELECTRICAL FUNCTIONS • Actuator: polyamide 6/6 • Bushing/bezel: zinc die-cast (zamak), black painted • Contacts: - silver, gold plated (std) - brass, gold plated (for...

Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary BUILD YOUR PART NUMBER BASIC PART NUMBER ELECTRICAL FUNCTIONS ACTUATOR SHAPES Round, curved, shiny NC/NO combined (non-illuminated) Round, curved Round, flat Solder lugs Flying leads, standard Flying leads, thin Silver, gold plated (standard) Brass, gold plated (option 104) Quick-connect (non-ill., NO only ) Actuator marking available on round flat models (symbol 10 mm max.). On request. ACTUATOR COLORS Dark blue Bright chrome Satin chrome bezel Bright chrome bezel High actuator (non-illum. round models only) Consult factory...

Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary Normally Open SQUARE - ILLUMINATED SOLDER LUG TERMINALS Also available with straight PC terminals: IPC3PAD LED color is indicated by the bottom of the switch. For THIN flying leads, replace F with W. Wire colors: black: NO contact, red: LED anode(+), blue: LED cathode(-) Shown with standard flying lead terminals. NC/NO combined Normally Open SQUARE - NON ILLUMINATED FLYING LEAD TERMINALS Also available with straight PC terminals: IPC3PAD (NO) or IPC5PAD (NC/NO) and quick-connect terminals: IPC3Z1AD (NO only) For THIN flying...

Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary Also available with straight PC terminals: IPR3PAD LED colour is indicated by the bottom of the switch. For THIN flying leads, replace F with W. Wire colors: black: NO contact, red: LED anode(+), blue: LED cathode(-) Shown with standard flying lead terminals. Curved actuator, NC/NO ROUND - NON ILLUMINATED SOLDER LUG TERMINALS Flat actuator, NC/NO Normally Open ROUND - ILLUMINATED FLYING LEAD TERMINALS Normally Open ROUND - ILLUMINATED SOLDER LUG TERMINALS PANEL SWITCHES Also available with straight PC terminals: IPC3PAD...

PANEL SWITCHES IP series Pushbutton switches for harsh environments • bushing Ø 12 mm • momentary ACTUATOR COLORS BASIC P/N Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome Non-illuminated Super red Yellow Green Blue White Red/green Yellow/green OPTIONS 100 Satin chrome bezel 101 Bright chrome bezel 104 High actuator - For round, non-illuminated only If combined with function 5 (NC/NO), order with CD contacts (instead of AD contacts). AGENCY APPROVAL BASIC P/N UL Consult factory for details of approved models. To order switches marked UL, complete above box with...