PANEL SWITCHES Pushbutton switches for joystick application • bushing Ø 16 mm • momentary DISTINCTIVE FEATURES Increased safety with a NAMUR switch Great tactile feedback Endless customization possibilities ENVIRONMENTAL SPECIFICATIONS • Sealing: IP69K (front) and IP67 (back) accoding to IEC 60529 - not panel sealed • Operating temperature: -20 °C to +65 °C • Storage temperature: -40 °C to +85 °C ELECTRICAL SPECIFICATIONS • Electrical function: Momentary • Max. current/voltage rating with resistive load : 10 mA, 5 VDC • Output with a pull-up resistor of 3.1 kohms (not included), 5 VDC - 0.1 mA to 2 mA - High position = 2.6 VDC -0.4/+0.2 (blue wire) - Low position = 0.5 VDC -0.1/+0.5 (blue wire) • Electrical life: 2 million cycles GENERAL SPECIFICATIONS • Total travel: 1.6 mm ± 0.4 mm • Typical operating force: 7.6 N ± 3 N • Maximum applicable force: 50 N The company reserves the right to change spec

PANEL SWITCHES IV series Pushbutton switches for joystick application • bushing Ø 16 mm • momentary MATERIALS • Body: PA, glass fiber reinforced; black • Actuator: PA, glass fiber reinforced, several colors available, see part number structure hereafter • Membrane: fluorinated silicone, black • Output: 600 mm long 24 AWG wires. ETFE or EFEP sheath PANEL MOUNTING • Panel thickness: 1.8 mm ± 0.1 mm • Panel cut-out:

Pushbutton switches for joystick application • bushing Ø 16 mm • momentary BUILD YOUR PART NUMBER BASIC PART NUMBER CONTACT TYPE Gold plated 10mA Namur Flying leads, 600mm long AWG24 ELECTRICAL FUNCTION Snapped body MARKING TYPE ACTUATOR COLOR MARKING COLOR MARKING ORIENTATION Light blue Dark blue Light blue MARKING CODE 3 digit see codes on pages 6 to 8 ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. 3 PANEL SWITCHES

Pushbutton switches for joystick application • bushing Ø 16 mm • momentary MODELS IV30-BW-XX-02XXXXX-A GENERAL TOLERANCE: PANEL SWITCHES Keying index for logo orientation Blue wire: Output Black wire Yellow wire: Backlight control 0 MARKING TYPES BASIC P/N No marking Hot stamping - for non illuminated products only, unicolored logos Note: The logo is part of aonly diameter of 8.00 and is oriented in relation to the index of the bushing. In-mold marking - For all products, allows backlighting and multi-colored logos The default orientation of the logo is "North" P/N APEM Example of logo orientation...

Pushbutton switches for joystick application • bushing Ø 16 mm • momentary MARKING COLORS GENERAL TOLERANCE: Light blue Dark blue Black Green Gray Yellow Red White Orange PANEL SWITCHES Keying index for logo orientation Blue wire: Output MARKING ORIENTATION Panel thickness: 1 ECHELLE 2:1 Marking orientation index is pointed by arrow: Note: The logo is part of a diameter of 9.50 and is oriented in relation to the index of the bushing. The default orientation of the logo is "North" Example of logo orientation P/N APEM Actuator color Example of north logo orientation With marking Logo color Logo...

PANEL SWITCHES IV series Pushbutton switches for joystick application • bushing Ø 16 mm • momentary MARKING CODE BASIC P/N By default and except for the dot logo (XCD), the markings are Ø9,5 mm for hot stamping and Ø8 mm for in-mold. Note that all these logo may not already exist and could increase the lead time of the first order. Revolving light Emergency first aid vehicle (2565) Rear ventilator Door opening Windshield demister/ defroster (0635) Combine, direction of movement (1678) Working spot light (1145) Side mirror defroster Restarting pump Down motion Taxi sign light (2551) Propulsion...

Engine idle control ECAS reset Cruise res/set Driver windows heating PANEL SWITCHES Driver windows up/ down Middle door opening Front door opening Read lighting Lighting in baggage room Lighting main switch Rear window wiper (0097) Cruise on/off Heating using water Rear window washer (0099) Position lights Diesel acceleration Toilet decontamination Manual mode Front windshield heating Clockwise cabin rotation Anticlockwise cabin rotation Rockshaft down Remove retarder Restricted speed Brake release Baggage room left door ECAS detection Baggage room right door Engine stop Power blinds Cruise res/cancel...

PANEL SWITCHES IV series Pushbutton switches for joystick application • bushing Ø 16 mm • momentary Battery charging condition (0247) Differential lock, bogie (2600) Brushing with a rotating brush (0070) Differential lock, transfer case 4x4 (2475) Loader bucket, float (1441) Rear window washer & wiper (0098) Header, Header drive (1579) Excavator/backhoe boom side shift (2091) Chemical water treatment (1851) Grapple skidder, single funct° boom (17