Ø12 mm panel mount LED indicators DISTINCTIVE FEATURES 8 mm colored diffused epoxy lens or 8 mm water clear super bright LEDs 2VDC - 220VAC (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating & Storage Temperature Range: Rear plastic body: -30 °C to +65° C ( –22 °F to +149 °F) Rear epoxy body: -40 °C to +85° C ( –40 °F to +185 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 30–100° (dependant on model) • Life Expectancy: 100,000 hours • Torque: 75 cNm • Maximum panel thickness 7 mm • Insulation resistance : 4,000 MΩ at 500 VDC MATERIALS • Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nomin

Q12 series Ø12 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Forward Voltage Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Forward Voltage HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Forward Voltage • The operating voltage...

Ø12 mm panel mount LED indicators BUILD YOUR PART NUMBER PROMINENT AND RECESSED BEZEL BEZEL STYLE MOUNTING HOLE Rear epoxy Pins BEZEL FINISH Rear epoxy Wires Bright Chrome Short body Pins Short body Wires Satin Grey Fixed Light White Orange Hyper Bright Red Hyper Bright Green Super Bright White Hyper Bright Yellow Super Bright Orange Hyper Bright Orange Super Bright Green Super Bright Yellow Super Bright Blue ABOUT THIS SERIES Red/Yellow/ Green * please refer to the forward voltage in electrical specifications Notice: please note that not all combinations of above numbers are available. • Gold...

Q12 series Ø12 mm panel mount LED indicators BUILD YOUR PART NUMBER FLUSH BEZEL BEZEL STYLE MOUNTING HOLE Fixed Light Rear epoxy Pins Rear epoxy Wires Bright Chrome Satin Grey BEZEL FINISH ABOUT THIS SERIES Notice: please note that not all combinations of above numbers are available. • Gold faston terminal denotes anode (+), silver terminal denotes cathode (-) • Standard wire length is 200 mm, 24 AWG UL1061, red wire denotes anode (+), black wire denotes cathode (-) for other wire lengths consult APEM • For leds with alternative voltages please consult Apem • Take care when soldering to the faston...

Ø12 mm panel mount LED indicators PROMINENT BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

Q12 series Ø12 mm panel mount LED indicators RECESSED BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

Ø12 mm panel mount LED indicators FLUSH BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS