*myagriexpo

Q8 series

Product catalog summary

Materials and Construction:
The LED indicators feature a plated brass bezel available in bright chrome, black, or satin grey finishes, with a molded polycarbonate rear body. A stainless steel 316L bezel is available in the flush version only.

General Specifications:
- Max Reverse Voltage: 5 V
- Viewing Angle: 30–100° depending on the model
- Life Expectancy: 100,000 hours
- Torque: 20 to 25 cNm
- Maximum panel thickness: 7 mm
- Insulation resistance: 4,000 MΩ at 500 VDC
The company reserves the right to change specifications without notice.

Distinctive Features:
- Available with IP67 sealing option (EN60529)
- Operating & Storage Temperature Range: Rear plastic body: -30 °C to +65 °C; Rear epoxy body: -40 °C to +85 °C

Mounting and Styles:
The Q8 series includes Ø8 mm panel mount LED indicators with prominent, recessed, and flush bezel styles. Termination options include solder lug/faston terminals, pins, or wire terminations.

Electrical Specifications:
- Operating Voltage and Current:
- 1.8 to 3.3 VDC: 20 mA max
- 6 VDC: 5.4 to 6.6 VDC, 20 mA
- 12 VDC: 10.8 to 13.2 VDC, 20 mA
- 24 VDC: 21.6 to 26.4 VDC, 20 mA
- 28 VDC: 25.2 to 30.8 VDC, 20 mA
- 110 VAC: 99 to 121 VAC, 6 mA
- 220 VAC: 207 to 235 VAC, 3 mA
*Note: Customer to supply resistor for desired operating current.

LED Component Specifications:
- Standard LED Intensity: Varies by color and style, with forward voltages ranging from 2.0 V to 3.3 V.
- Super Bright and Hyper Bright LED Intensities: Higher luminous intensities for outdoor and long-distance viewing.

Additional Information:
- Operating voltage should not exceed 10% above the specified range to avoid reduced life expectancy.
- Luminous intensity is measured at 20 mA unless otherwise stated.
- Recommended usage varies by LED brightness level, with specific applications for indoor, outdoor, and long-distance viewing.

Part Number Configuration:
The part number is built based on LED color, type of illumination, voltage, sealing, terminals, bezel style, and finish. Not all combinations are available.

Important Notes:
- Gold faston terminal denotes anode (+), silver terminal denotes cathode (-).
- Bi-color LEDs change color by reversing the polarity of the supply voltage.
- Tri-color LEDs combine red and green to produce yellow when both are connected.
- Mains voltage products are not recommended for use on 3-phase appliances.

Catalog excerpts

Q8 series Ø8 mm panel mount LED indicators DISTINCTIVE FEATURES 5 mm colored diffused epoxy lens or 5 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations (2.0 x 0.5) solder lug/faston terminals on tri-color versions ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating & Storage Temperature Range: Rear plastic body: -30 °C to +65 °C ( –22 °F to +149 °F) Rear epoxy body: -40 °C to +85 °C ( –40 °F to +185 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 30–100° (dependant on model) • Life Expectancy: 100,000 hours • Torque: 20 to 25 cNm • Maximum panel thickness 7 mm • Insulation resistance : 4,000 MΩ at 500 VDC MATERIALS • Plated brass bezel finished in bright chrome, black or satin grey and molded polycarbonate rear body • Stainless Steel 316L bezel in flush version only The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nom

Open the catalog to page 1

Q8 series Ø8 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Forward Voltage Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Forward Voltage HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Forward Voltage • The operating voltage...

Open the catalog to page 2

Ø8 mm panel mount LED indicators BUILD YOUR PART NUMBER BEZEL STYLE MOUNTING HOLE Rear epoxy Pins BEZEL FINISH Rear epoxy Wires Bright Chrome Short body Pins Short body Wires Satin Grey Short body Lug/ Fastons (2.8 x 0.8) Extended short body solder Lug/ Fastons (2.8 x 0.5) Fixed Light Blue White Orange Hyper Bright Red Hyper Bright Green Super Bright White Hyper Bright Yellow Super Bright Orange Hyper Bright Orange Super Bright Green Super Bright Yellow Super Bright Blue *Flush version only Red/Yellow/ Green ABOUT THIS SERIES * please refer to the forward voltage in electrical specifications...

Open the catalog to page 3

Q8 series Ø8 mm panel mount LED indicators PROMINENT BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

Open the catalog to page 4

Ø8 mm panel mount LED indicators PROMINENT BEZEL (CONTINUED) EXTENDED SHORT BODY SOLDER LUG/FASTONS SHORT BODY SOLDER LUG/FASTONS SHORT BODY PIN (TRI COLOR) 24.60 FLUSH BEZEL SOLDER LUG/FASTON

Open the catalog to page 5

Ø8 mm panel mount LED indicators FLUSH BEZEL (CONTINUED) REAR EPOXY PINS REAR EPOXY WIRES SHORT BODY WIRES SHORT BODY PINS SHORT BODY SOLDER LUG/FASTONS EXTENDED SHORT BODY SOLDER LUG/FASTONS SHORT BODY PIN (TRI COLOR)

Open the catalog to page 6

Ø8 mm panel mount LED indicators RECESSED BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

Open the catalog to page 7

Ø8 mm panel mount LED indicators RECESSED BEZEL (CONTINUED) SHORT BODY SOLDER LUG/FASTONS SHORT BODY PIN (TRI COLOR) Q8 series EXTENDED SHORT BODY SOLDER LUG/FASTONS

Open the catalog to page 8