Catalogs >
APEM GmbH >
QRM-NV series

QRM-NV series
5Pages

Catalog excerpts

QRM-NV series Ø8 and Ø14 mm rear panel mount • NVIS LED indicators DISTINCTIVE FEATURES NVIS Green A, NVIS Green B, NVIS Yellow, NVIS Red, NVIS White NVIS compliant to MIL Std 3009 200 mm wire for Ø 8 and 14 mm or rigid pin (1.00 mm) for Ø8 mm terminations ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating Temperature Range: -40 °C to +85 °C ( –40 °F to +185 °F) • Storage Temperature Range: -55 °C to +100 °C (-67 °F to +212 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 60° • Life Expectancy: 100,000 hours • Max Panel Thickness: 3.5 mm • Torque: Ø8 mm: 60 cNm Ø14 mm: 75 cNm • Insulation resistance : 4,000 MΩ at 500 VDC • Salt spray test: 96 hours (IEC 68-2-11) ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered

Open the catalog to page 1

QRM-NV series Ø8 and Ø14 mm rear panel mount • NVIS LED indicators ELECTRICAL SPECIFICATIONS (CONTINUED) LED COMPONENT SPECIFICATIONS LED Color NVIS Radiance NVIS Chromoticity Dominant Wavelength Forward Voltage NVIS Yellow Class A NVIS Yellow Class B NVIS White • The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy • Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. • Luminous intensities and color shades of white LEDs may vary within a batch. • Luminous intensity will be reduced with lower operating...

Open the catalog to page 2

Ø8 and Ø14 mm rear panel mount • NVIS LED indicators BUILD YOUR PART NUMBER Fixed Light Ridgid Pins (only with Ø8 mm) NVIS White BEZEL FINISH Anodized Dark Olive Anodized Black MOUNTING HOLE 12 VAC/DC 24 VDC 24 VAC/DC 28 VDC 28 VAC/DC * please refer to the forward voltage in electrical specifications ABOUT THIS SERIES Notice: please note that not all combinations of above numbers are available. • Standard wire length is 200 mm, 24 AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM. • For LEDs with alternate voltages and multi-voltage...

Open the catalog to page 3

Ø8 and Ø14 mm rear panel mount • NVIS LED indicators Ø8 MM REAR MOUNT - PINS TERMINALS Ø8 MM REAR MOUNT - WIRES TERMINALS Ø14 MM REAR MOUNT - WIRES TERMINALS HARDWARE - CYLINDRICAL DRESS NUTS - FOR Ø8 MM ONLY O 10,00 0,394 QRM-NV series

Open the catalog to page 4