QRM14 series

1 / 4 PagesView full catalog

QRM14 series

Product catalog summary

General Specifications:

IP67 Sealed with bi-color and tri-color options.
Voltage range: 2 to 28 VDC with 200 mm wire terminations.
Operating temperature: -40°C to +85°C; Storage temperature: -55°C to +100°C.

Distinctive Features:

IP67 sealing option compliant with EN60529.
Durable materials including black plated brass or anodized aluminum body.

Environmental Specifications:

Insulation resistance: 4,000 MΩ at 500 VDC.
Salt spray test: 96 hours (IEC 68-2-11).

Electrical Specifications:

Operating voltage must not exceed 10% above specified range to avoid reduced life expectancy.
Luminous intensity varies with current and environmental conditions.

LED Component Specifications:

Standard, super bright, and hyper bright LED intensities available.
Bi-color and tri-color options with specific voltage and intensity characteristics.

Mounting and Assembly:

Rear panel mount with Ø 14 mm hole.
Standard wire length is 200 mm, with specific wire color coding for anode and cathode.

Build Your Part Number:

Options for voltage, sealing, series, mounting hole, terminals, bezel finish, and LED color.
Not all combinations are available; consult APEM for custom configurations.

Catalog excerpts

Ø 14 mm rear panel mount LED indicators DISTINCTIVE FEATURES IP67 Sealed Bi-Color & Tri-Color Options 2 to 28 VDC 200 mm wire terminations ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating Temperature Range: -40 °C to +85 °C ( –40 °F to +185 °F) • Storage Temperature Range: -55 °C to +100 °C (-67 °F to +212 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 60° • Life Expectancy: 100,000 hours • Max Panel Thickness: 3.5 mm • Torque: 75 cNm (Ø 14 mm) • Insulation resistance : 4,000 MΩ at 500 VDC • Salt spray test: 96 hours (IEC 68-2-11) MATERIALS • Body: Black plated brass or anodized aluminum • Lock Washer: Spring steel • Nut: Black plated brass • Terminal Seal: Epoxy • Panel Seal: Nitrile O-ring • Wires: 22A WG - Approved to UL1007 The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be cons

Open the catalog to page 1

QRM14 series Ø 14 mm rear panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Flush Forward Voltage Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Flush Forward Voltage HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Flush Forward Voltage • The operating voltage must not be exceeded...

Open the catalog to page 2

Ø 14 mm rear panel mount LED indicators BUILD YOUR PART NUMBER MOUNTING HOLE BEZEL FINISH Fixed Light Hyper Bright Green Anodized Dark Olive Anodized Black Hyper Bright Yellow Super Bright White Hyper Bright Orange Super Bright Orange Super Bright Green Red/Yellow Green/Yellow Super Bright Yellow Super Bright Blue Red/Yellow/ Green * please refer to the forward voltage in electrical specifications ABOUT THIS SERIES Notice: please note that not all combinations of above numbers are available. • Standard wire length is 200 mm, 22A WG UL1007, red wire denotes Anode (+), black wire denotes Cathode...

Open the catalog to page 3

QRM14 series Ø 14 mm rear panel mount LED indicators REAR MOUNT - WIRES TERMINALS - SINGLE & BI-COLOR LED REAR MOUNT - WIRES TERMINALS - TRI-COLOR LED

Open the catalog to page 4