TR series Subminiature washable rocker switches DISTINCTIVE FEATURES Process sealed Single piece case Front and rear sealing Wide variety of contact materials Same PCB layout as TL, TP and TG subminiature switches ENVIRONMENTAL SPECIFICATIONS • Operating temperature : -30 °C to +85 °C (-22 °F to +185 °F) • Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3) ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - gold plated contacts : 0.4 VA 20 V max. AC or DC - silver plated contacts : 0.5 A 48 V max. AC or DC • Minimum load : 10 mA 50 mV - 10 µA 5 VDC • Contact resistance : 20 mΩ max. • Insulation resistance : 1,000 MΩ min. at 500 VDC • Dielectric strength : 1,000 Vrms 50 Hz min. between terminals and frame 500 Vrms 50 Hz min. between terminals • Electrical life at full load : Contacts Number of cycles 2 positions Gold plated Silver plated GENERAL SPECIFICATIONS • Strength of terminals : pull-out force - 10 N max • Cleaning : solvents or water + detergent • Wave soldering : 260 °C (500 °F) - 5 sec. The company reserves the right to change spec

Subminiature washable rocker switches • Case : PBT • Actuator : polyamide • Contacts and terminals : 0 : brass, gold plated 1 : brass, silver plated 3 : brass, gold plated (1.27 micron gold) 8 : contact brass, gold plated + tin plated terminals 9 : contact brass, gold plated (1.27 micron gold) + tin plated terminals ELECTRICAL FUNCTIONS • Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. With small rocker With large rocker

Subminiature washable rocker switches BUILD YOUR PART NUMBER BASIC PART NUMBER ELECTRICAL FUNCTIONS Single pole Double pole Bracket mounting Right angle, horizontal mounting Right angle, vertical mounting CONTACTS AND TERMINAL MATERIALS Brass, gold plated CASE COLOR SPECIAL OPTIONS Brass, silver plated Trimmed terminals - length 3.2 (.125) Brass, gold plated (1.27 micron gold) Extended terminals Contact brass, gold plated + tin plated terminals Switch without ground plate Ground plate with 2 pins Contact brass, gold plated (1.27 micron gold) + tin plated terminals (SP only) Trimmed terminals...

Subminiature washable rocker switches STRAIGHT PC TERMINALS : TR..P0 RIGHT ANGLE TERMINALS VERTICAL MOUNTING : TR..WW *Functions 2 and 8 : reversed connection available . Consult factory. Double pole Single pole RIGHT ANGLE TERMINALS HORIZONTAL MOUNTING : TR..W0 Double pole Single pole Single pole STRAIGHT TERMINALS BRACKET MOUNTING : TR..Y0 Single pole

Subminiature washable rocker switches CONTACT AND TERMINAL MATERIALS BASIC P/N Brass, gold plated Brass, silver plated Brass, gold plated (1.27 micron gold) Contact brass, gold plated + tin plated terminals Contact brass, gold plated (1.27 micron gold) + tin plated terminals (single pole only) CASE COLOR BASIC P/N Blue SPECIAL OPTIONS BASIC P/N 07 Trimmed terminals - length 3.2 mm (.125) for TR..WW models only 08 Extended terminals for TR..W0 models only 18 Switch without ground plate for TR..WW models only 20 Ground plate with 2 pins for TR..WW models only 25 Trimmed terminals - length 5 mm...

Subminiature washable rocker switches For cap colors, replace "0" by number : 1 Blue 1/4 Dark blue 2 Black 3 Green 4 Grey 5 Yellow 6 Red 7 Ivory 7/1 White 9 Orange Small Large