ISOBUS
1 / 20Pages

ISOBUS ARAG INTELLIGENCE

Auxiliary inputs Virtual Terminal Isobus plug What Is ISOBUS? ISOBUS is an international standardised communication protocol that allows different agricultural equipments to communicate through a common language. What Does This Mean? The ISOBUS control system allows the operator to connect and control different implements using the same tractor and screen for all applications.

VIRTUAL TERMINAL ISOBUS tools have become an integral part of modern field activities, particularly in applications such as sowing, cultivation and spraying. Given that not all tractors are equipped to connect these tools, ARAG has developed all the necessary components (Virtual terminal, wiring with tool socket, auxiliary controls) to make any tractor compatible with the ISOBUS system. AUXILIARY IMPUTS ISOBUS CONNECTION

Large 8.4” color display, maximum ergonomics and possibility to connect to data networks anywhere and at any time. SMART 2 GPS Receiver Position accuracy from 18 up to 2cm with the use of RTK correction SMART 7 GPS Receiver • ISOBUS (VT) monitor 8.4” touch screen. • GPS navigation. • Automatic boom shut-off (TC-SC). • Variable application (TC-GEO). • Task Isoxml management (TC-BAS). • Manages data relevant to spraying treatments. • Compatible with POLARIS automat

AUXILIARY IMPUTS Switch Boxes Joystick Controller The joystick EXPLORER allows to manage all spraying and hydraulic functions directly from the handle. This ensures a solid anchor point and a stable acceleration control. • Tactile feedback about status messages will be transmitted through vibration (haptic technology). • 15 keys to control up to 39 functions. • 4 status LED. • Silicon rubber back-lit keyboard. • Completely waterproof IP65. Sequential control allows the user to command up to 13 boom sections using two switches only, one for the right side and one for the left side. A special...

POLARIS The new POLARIS assisted driving system automates steering on both straight and curved paths, when connected to Delta 80T. • • • • Reduces skipped and overlapping areas. Allows saving time, fuel and chemical product. Easy to install. Requires less efforts of the operator and allows focusing on the spraying. • ISOBUS (VT) monitor 8.4” touch screen. • GPS navigation. • Automatic boom shut-off (TC-SC). • Variable application (TC-GEO). • Task Isoxml management (TC-BAS). • Manages data relevant to spraying treatments. • Compatible with POLARIS a

Boom leveling with fixed geometry This function has been designed for the IBX100 to maintain a uniform distance of the boom from the ground even in case of gradients thus ensuring a correct treatment coverage. • High precision and reduced response time. • User friendly. • Suitable also for already existing sprayers. Draw bar and steering axle Draw bar and steering axle management are additional functions of the IBX100 Hydraulic ECU. With these functions the machine will drive to the tram line minimizing crop crushing. DRAW BAR by measuring the draw bar angle, IBX100 suitably controls the...

IBX100 Sprayer/Hydraulic ISOBUS è l’unità di controllo (Implement ECU) che permette di gestire tutte le più avanzate funzioni della macchina da diserbo. • Distribuzione proporzionale all’avanzamento (DPA) e chiusura automatica delle sezioni. • Selezione automatica dell’ugello più adatto al dosaggio e alla velocità (solo con Seletron doppio e quadruplo). • Indicazione del livello di liquido effettivamente presente in cisterna. • Calibrazione automatica del sensore di livello cisterna, con possibilità di esportare/importare il profilo della cisterna. • Possibilità di gestione ugelli...

Spray and Recirculating Diagrams TANK Pump Reg Valve Flowmeter SPRAY MODE Fluid flow Dump Valve Boom Recirculation System (BRS) Arag ISOBUS makes BRS easy! The BRS allows the boom to be plumbed in recirculation configuration. This means that when dump valve is switched in the OFF position, the flow continues to run through the boom and back to the tank. The BRS prevents heavy particles from settling in the boom line by allowing the full flow of the pump being returned to tank when not spraying, helping to prevent possible contamination. TANK BRS also helps to keep the chemicals properly...

A Three Tier System (3TS) provides three different nozzle configurations using two “rows” of nozzles, giving the operator more versatility while spraying. The below example uses 01 & 015 nozzles @ 70 l/ha. FIRST TIER THIRD TIER As acceleration starts 01 nozzles and operate from 8 to 12 kph. SECOND TIER As acceleration increases 01 nozzles turn OFF at approx 12 kph, 015 nozzles turn ON and spray up to 15 kph. As acceleration increases from 15 to 25kph, 01 + 015 nozzles will be spraying (01+015=025) giving 3 Tier Spraying)

Single SeleTRON What is SeleTRON SeleTRON is an electronic actuating shut-off nozzle valve that turns each nozzle on the boom into a section. This allows individual on/off control of every nozzle. • Auto Section Control (ASC). • Individual nozzle control. • Eliminates over/under spray, leading to chemical savings. • 3TS capability and custom nozzle shift. Turns every nozzle ON/OFF individually to prevent any overlap or missed area. Twin SeleTRON Turns every nozzle ON/OFF individually to prevent any overlap or missed area. Allows 3TS for extended speed range. • High speed operation. • BRS....

What is Compact Flow Stop? Compact Flow Stop is an air operated shut off nozzle valve. The Compact Flow Stop can also be run as a 3TS System and allows BRS. Single Compact Flow Stop • Turns nozzles off in Sections. • Turns nozzles off in Sections. • Reduces overlap and overspray. • Reduces overlap and overspray. • Full boom prime. • Full boom prime. Twin Compact Flow Stop Also available with: (2+2) Ro