FITOCLIMA 600 & 1200 BIO
14Pages

PLANT GROWTH RESEARCH ‘REACH-IN’ ENVIRONMENTAL CHAMBERS

ARALAB is a company specialized in designing, developing, manufacturing and servicing of high quality climatic chambers and controlled environment rooms. Since 1985 we have been perfecting ways to create and control temperature, humidity, light, air flow and many other environmental conditions. Only the highest quality components are used to manufacture our chambers so customers can have the best equipment for their research and testing purposes. Control the Environment. Your Own Climate. FitoClima Bio chambers provide the control and flexibility to meet the evolving needs of researchers...

Photo example of a FitoClima 1200 HP LED

[1] Temperature and Humidity performances with Lights ON can be affected by the chosen light configuration (LEDs, Fluorescent, Other types) and light intensity set-point. Due to heat dissipation from the lamps - depending on the chosen type of light solution - high light intensities can affect Temperature and Humidity performances and Uniformity values. Please consult Aralab for specific information regarding the combination of light types, intensities, and how they can affect temperature and humidity performances. [2] Standard included light configuration: 4 fluorescent or LED tubes in...

NUMBER OF LIGHT SHELVES INCLUDED GROWTH HEIGHT BETWEEN SHELVES (APPROXIMATELY) GROWTH AREA GROWTH AREA WITH OPTIONAL ADDITIONAL TIER (LED ONLY) Up to 3,3 m2 (with 10 wire shelves) LIGHT INTENSITY (AT 150MM FROM LIGHT SOURCE) FITOCLIMA 1200 PL/PLH CONFIG 1 FITOCLIMA 1200 PL/PLH CONFIG 2 NUMBER OF LIGHT SHELVES GROWTH HEIGHT BETWEEN SHELVES AND LIGHTS GROWTH AREA GROWTH AREA WITH OPTIONAL ADDITIONAL TIER (LED ONLY) LIGHT INTENSITY (AT 150MM FROM LIGHT SOURCE) PLANT GROWTH RESEARCH ‘REACH-IN’ ENVIRONMENTAL CHAMBERS

Fresh air intake (021 mm)Exhaust air And passthrough (080 mm) 1. 2. Standard refrigeration system is air cooled 3. 0 Services hub installation needs: I 0 %” male demineralized water supply valve I In case of reverse osmosis/cylinder (optional): 4. %” male tap water valve connection 5. Pressure: 1-5 Bar 0 50mm water drain at floor level 0 Electrical cabinet installation needs: Supply power: 230VAC, 50Hz, 10A / Single Phase + Neutral + Ground Electrical protection: Circuit breaker 16A + N with 30mA differential Heat dissipation to room: Approx. 0,3kW 0 RJ45 communication port Weight: 170Kg...

Standard refrigeration system is air cooled 3. (-20°C model is water cooled. See point 5.) I 0 Services hub installation needs: I 0 %” male demineralized water supply valve I In case of reverse osmosis/cylinder (optional): 5. %” male tap water valve connection Pressure: 1-5 Bar 0 50mm water drain at floor level 6. 0 Electrical cabinet installation needs: Supply power: 230VAC, 50Hz, 12,5A / Single Phase + Neutral + Ground Electrical protection: Circuit breaker 16A + N with 30mA differential Heat dissipation to room: Approx. 0,5kW 0 RJ45 communication port Weight: 250Kg (depending on final...

LIGHT TYPES AND INTENSITIES COOL-WHITE LED 4000K Shelves with 4 tubes: 400 μmol/m²/s (at 150mm) Shelves with 8 tubes: 600 μmol/m²/s (at 150mm) WARM-WHITE LED 3000K Shelves with 4 tubes: 400 μmol/m²/s (at 150mm) Shelves with 8 tubes: 600 μmol/m²/s (at 150mm) HP LED 3500K Per shelf: 1.400 μmol/m²/s (at 500mm) and 3.000 μmol/m²/s (at 150mm) 8IIA SPECTRUM LED MODULE Per shelf: 660 μmol/m²/s (at 500mm) and 1.300 μmol/m²/s (at 150mm) Note: Variable spectrum LED module. Intensity will be spectra dependent. Above measurements are with all channels turned ON PLANT GROWTH RESEARCH ‘REACH-IN’ ENVIR

• Multiple tiers of shelves inside, with easy height adjustement • Suitable for small and medium plants, insect rearing or tissue culture VERTICAL LIGHTS - PL-V AND PLH-V MODELS • Lights installed on the side walls of the chamber • Allows increased storage and growth area • Suitable for insectaries, tissue culture and plant growth SINGLE-TIER - HP MODELS • High performance lighting, allowing +1.000 pmoles intensity • Suitable for medium to tall plants PLANT GROWTH RESEARCH ‘REACH-IN’ ENVIRONMENTAL CHAMB

EQUIPMENT DESCRIPTION CONSTRUCTION & CONTROL Multi-color 7-inch touch-screen ClimaPlus© controller Open door alarm with configurable time-out function Highly resistant stainless-steel interior with white reflective coating Polyurethane insulation Exterior zinc plated steel and gray epoxy paint Pivoting door(s) with spring lock, magnetic gasket and safety lock(s) 4 and 5 built-in casters 80mm Ø side entry port ENVIRONMENTAL CONTROL • Air-cooled, CFC free, mechanical refrigeration by hermetic compressor • Dual heating technology with hot gas by-pass and stainless steel electric heaters •...

• Programmable Logic Controller exclusively developed by Aralab for FitoClima chambers • Easy to use touch-screen interface • 90mm x 155mm (7 inch) multicolor display • Controls every environmental variable available for any specific FitoClima model (Temperature, Humidity, Lights, Airflow, CO2 and connected external devices) • Friendly program editor for creating 32 programs of 24 segments each, allowing the design of complex and comprehensive climatic simulation programs • Password protection of the controller functions • Content and research protection feature, with configurable High, Low...

FITOLOG SOFTWARE The FitoLog software pack is a set of applications designed to facilitate the managing, monitoring and recording of programs and data from the FitoClima chambers. It consists of 3 applications: FitoLog, FitoLogView and FitoProgram. FITOLOG Records and displays in real time all data and details related to the set-points, running variables and equipment behaviour. It also retrieves information about the active components of the chamber, running processes, errors, alarms and allows the configuration of periodic or alarm triggered remote notifications (by email or SMS,...