FLOAT LEVEL CONTROL VALVE 2 DESCRIPTION Armaş “FL” model float level control valve is the hydraulic control valve designed to control water level in reservoirs and tanks continuously. Main valve is controlled by 2-way modulating type float pilot valve or manually. Main valve mounted on upstream of a reservoir or tank is closed as fully sealed without causing surge when water level reaches to maximum level. Valve opening/closing speed may be adjusted. It may be used in the system by mounting in horizontal or vertical orientations. CONTROL SYSTEM COMPONENTS 1 Needle Valve 3 In-line Finger Filter ELECTRIC FLOAT LEVEL CONTROL VALVE DESCRIPTION Armaş “FLEL” model electrical float level control valve is the hydraulic control valve designed to control water level continuously by means of electrical float placed in reservoirs and tanks. Electrical float sends signal to solenoid coil on main valve when water level decreases below set level. Main valve is opened and ensures that tank or reservoir will be filled permanently. When water reaches maximum level, electrical float sends signal to solenoid coil again and main valve is closed as full sealed. Valve may be used in the system by mounting horizontal or vertical positions. CONTROL SYSTEM COMPONENTS 1 In-line Finger Filter Solenoid Pilot Valve Electric Float Switch