Overview

This document is a comprehensive technical catalog detailing LED end outline marker lamps and related accessories used primarily for vehicle boundary marking to enhance safety. It covers product specifications, variants, mounting options, spare parts, and compliance with environmental and safety standards.

1. Product Specifications and Variants

The primary product lines include the SUPERPOINT IV LED, SUPERPOINT III LED, SUPERPOINT II LED, and FLEXIPOINT I series. These LED lamps operate mainly at 12V or 24V and are designed for automotive and trailer lighting applications.

• Voltage: 12V and 24V options available.
• Connector Types: Multiple connector systems including 2-pin ASS2, 3-pin ASS3, 2-pin Superseal, P&R connectors, and open-end cables with contact pins or flat connectors.
• Cable Lengths: Range from 0.04 m up to 5.0 m depending on model and connector type.
• Protection Ratings: IP69K and IP68 ratings ensure high resistance to dust and water ingress, suitable for harsh environments.
• Zone Classification: Certified for Zone 2 hazardous areas, indicating suitability for specific industrial environments.

2. Product Identification and Coding

Each product variant is identified by a unique part number (e.g., 31-3104-004, 31-6564-144) that specifies voltage, connector type, cable length, and pin configuration. Accessory and spare part codes (e.g., 41-100 series) are referenced for compatibility and ordering.

3. Physical Dimensions

Dimensional data is provided for various models, with typical lengths around 130.5 mm and widths near 9.5 mm, critical for ensuring proper fit and installation on vehicles.

4. Mounting and Installation

The lamps come with a variety of mounting brackets to allow flexible installation on different vehicle types. Available brackets include angle brackets, turnable flat brackets, flexible rubber holders, mud guard brackets, and soft brackets. Proper selection of mounting accessories ensures optimal visibility and secure attachment.

5. Spare Parts and Accessories

• Lenses: Available in multiple color combinations such as red, white, orange, and black/white/orange.
• Connectors: ASS1, ASS2, ASS3 (male and female), Superseal (2-pin male and female), and P&R connectors.
• Caps and End Caps: Closure caps, round end caps, and square end caps for cable protection and sealing.
• Connection Cables: Front connection cables in various lengths (0.5 m, 1.5 m, 5.0 m) for P&R connectors.

6. Technical and Environmental Standards

• Products meet IP69K and IP68 ingress protection ratings, ensuring durability against dust, water, and high-pressure cleaning.
• Zone 2 certification confirms suitability for hazardous environments as per ADR regulations.

7. Key Recommendations and Critical Information

• Ensure correct selection of connector type and cable length to match installation requirements and maintain system compatibility.
• Use appropriate mounting brackets and end caps to secure lamps and protect connectors from environmental damage.
• Products are designed for harsh environmental conditions, making them suitable for industrial and automotive applications requiring high durability.

Summary

This document serves as a detailed technical reference and ordering guide for LED end outline marker lamps and their accessories. It provides essential information on product variants, connector systems, cable lengths, mounting options, and compliance with environmental and safety standards. The extensive listing of part numbers and accessories supports efficient selection, installation, maintenance, and replacement in vehicle lighting systems.