Introduction
The document provides detailed information about the Agromaster Corn Forage Harvester, specifically the single-row model. It highlights the machine's design, functionality, and technical specifications.

Specifications
The harvester is hydraulically mounted to a tractor using a universal three-point linkage system, allowing easy transportation. It operates efficiently with low power and fuel consumption, driven by the tractor's power-take-off shaft. The machine features mowing discs made from special steel for high-quality cutting, preserving plant nutrients and water content. A cutting plate can be adjusted to chop dry corn particles, and the discharge pipe is remotely controlled.

Technical Specifications

• Number of Rows: 1
• Total Width (Transport): MSM 70 - 2370 mm (7'9"), MSH 70 - 2270 mm (7'5")
• Total Length (Transport): 3500 mm (11'6")
• Total Height: 3500 mm (11'6")
• Working Width: 700 mm (2'4")
• Control of Chimney and Routing Plate: Mechanical for MSM 70, Hydraulic for MSH 70
• Number of Airfoils on The Fan: 6
• Number of Drums: 2
• Number of Shredder Blades: 12
• Chimney Outlet Diameter: Ø 130 mm
• Chimney Rotation: 100 degrees
• Cutting Height: Min. 50 mm (2") - Max. 150 mm (6")
• Chopped Material Size: Min. 5 mm
• Working Capacity: 20-25 tons/hour
• Required Power: 70 hp
• Total Weight: MSM 70 - 600 kg (1322 lbs), MSH 70 - 625 kg (1322 lbs)

Additional Features
The harvester includes a sharpening knife system, a hydraulically reversible flue system, and cutting blades. It is designed for durability and efficiency in agricultural operations.

Contact Information
Agromaster is located in Selcuklu, Konya, Turkey. For inquiries, contact via phone at +90 332 235 64 23 or email at [email protected].

Disclaimer
Product visuals may differ from reality, and the manufacturer reserves the right to change specifications without notice.