HORIZONTAL STRAW CHOPPER
8Pages

{{requestButtons}}

Catalog excerpts

HORIZONTAL STRAW CHOPPER - 1

HORIZONTAL STRAW CHOPPER YSP / YSPX VERTICAL STRAW CHOPPER FIXED TYPE DSP “We know the soil” www.agromaster.com

Open the catalog to page 1
HORIZONTAL STRAW CHOPPER - 2

HORIZONTAL STRAW CHOPPER Chopping of the stalks which are left behind after harvesting in herbal production like sunflower, corn, cotton, and cereals is important for agriculture. Burning of stubbles is prevented. After burning operation the great part of the water is wasted so water and wind erosion increase and the soils moisture holding capacity decreased. It is possible to provide a stable upper lever against to erosion by means of mixing the stubble with soil or expanding the stubble over cropland surface. So the stubble should not be burned and cover soil should be applied for...

Open the catalog to page 2
HORIZONTAL STRAW CHOPPER - 3

“We know the soil” Technical Specifications* Overall Width (W) Overall Length (L) Overall Height (H) Working Width Linkage of Suspension System Working Capacity Required Power Total Weight 1 inch = 25,4 mm - 1 inch = 0,083 feet (foot) - 1 feet (foot) = 12 inch * Manufacturer reserves rights to change them without notice.

Open the catalog to page 3
HORIZONTAL STRAW CHOPPER - 4

VERTICAL STRAW CHOPPER FIXED TYPE Vertical Mulcher machine is mounted to tractor's hydraulic lifting unit and universal three point linkage system and getting drive from P.T.O. Therefore transportation to the field can be easily done. It works vertically on the surface of the soil and the shredder blades of the machine are jointed to the pipe. It preserves the cutting height, strength of the blades and balance sensitivity even though the surface of the soil is uneven thanks to its skids on the sides and its roller at the back. With Fixed Stalk Cutter with Vertical Blades type makes it...

Open the catalog to page 4
HORIZONTAL STRAW CHOPPER - 5

“We know the soil” Technical Specifications* Overall Width (W) Overall Length (L) Overall Height (H) Working Width Linkage of Suspension System Required Power Total Weight 1 inch = 25,4 mm - 1 inch = 0,083 feet (foot) - 1 feet (foot) = 12 inch * Manufacturer reserves rights to change them without notice.

Open the catalog to page 5
HORIZONTAL STRAW CHOPPER - 8

Buyukkayacik Mahallesi Org. San. Bolgesi Evrenkoy Cad. No:32 • Selcuklu/Konya/TURKEY +90 332 235 64 23 info@agromaster.com www.agromaster.com Product visuals may differ from reality, Our company is not responsible for typographical errors.

Open the catalog to page 8

All Atespar Motorlu Araclar San. ve Tic. Ltd. Sti. catalogs and technical brochures

  1. BAF

    6 Pages

  2. FINGER RAKES

    8 Pages