C151H

C151H

C151H

Product catalog summary
General Specifications
  • Load Capacity: Up to 1500 kg at 500 mm and 1350 kg at 600 mm for C151H x2; 2750 kg at 500 mm for C151H x4.
  • Unladen Weight: Varies with optional equipment.
  • Transmission: Hydrostatic with two gears pump and retention.
Mast Specifications
  • Fork Carriage: FEM llB with a width of 1260 mm.
  • Type of Mast: Duplex and Triplex options available.
Engine Specifications
  • Make and Model: KUBOTA D1105.
  • Power: 18.5 kW at 3000 rpm.
  • Torque: 71.5 N·m at 2200 rpm.
  • Emissions: Stage V, Tier 4 compliant.
Driving Specifications
  • Max Speed: 18 km/h.
  • Gradability: 32% for C151H x2 and 33% for C151H x4.
  • Traction: 4x2 for C151H x2 and 4x4 FullGrip® for C151H x4.
  • Tyres: Front: 27x10.50-15; Rear: 7.00-12 for C151H x2 and 27x10.50-15 for C151H x4.
Hydraulic System
  • Hydraulic Circuit: Two gears pump.
  • Flow Rate: 34 l/min.
  • Working Pressure: 215 bar.
Tank Capacity
  • Fuel: 35 liters.
  • Hydraulic: 40 liters.
Brakes
  • Service Brake: Hydrostatic.
  • Parking Brake: Negative.
Dimensions
  • Maximum Lift: 1975 mm for C151H x2 and 3380 mm for C151H x4.
  • Retracted Mast Height: 235 mm for C151H x2 and 2550 mm for C151H x4.
  • Extended Mast Height: 205 mm for C151H x2 and 100 mm for C151H x4.
  • Free Lift: 1315 mm for C151H x2 and 1390 mm for C151H x4.
Additional Information
  • Products are subject to modifications without prior notice.
  • Images may refer to non-standard machines or unavailable configurations.
See more

Catalog excerpts

C151H-1

TECHNICAL DATA GENERAL Unladen weight * Transmission MAST Fork carriage Carriage width ENGINE Make Model Power Operating speed Torque No. cylinders Front tyres Rear tyres Hydrostatic, retention Hydrostatic, retention Emissions Ambient noise DRIVING HYDRAULIC SYSTEM Hydraulic circuit Flow rate Working pressure TANK CAPACITY * It may change due to optional equipment

 Open the catalog to page 1
C151H-2

Retracted mast Extended mast Free lift Load at maximum height Measured with high-lift mast installed 2Measured for wide axle carriage Products are subject to modifications without prior notice. Images throughout the spec sheet may refer to non-standard machines or non-available configurations depending on models. AUSA's logo and corporate identity are property of the Company, they cannot be used without authorization.

 Open the catalog to page 2

All Ausa catalogs and technical brochures

  1. C151E

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.