APS
2Pages

nuTomnTic pumpine SYSTem APS PRO If you already have an incubator, which only controls temperature, and in case you want to control humidity, Rcom APS PRO is the best way. APS PRO D.I.Y The best solution to control both temperature & humidity easily at lowest cost for DIY artificial incubator is Rcom APS DIY. - Pump- Humidification working lamp ( Light on when operating) Heater working lamp (Light on when operating) Temp. & Humidity Display Motor speed control VR Temp. & Humidity up button Temp. & Humidity down button Power, Heater connecting part Humi. & Temp. Sensor. FEATURES & ADVANTAGES of APS PRO / APS PRO D.I.Y > Automatic Humidity Controlling Apparatus by setting up the button. > Automatic Temperature Controlling Apparatus by setting up the button. ★ > Heater Controller Apparatus for automatic temperature controlling. ★ > Temperature and humidity calibration function. > Strong Motor and pumping ability which can take up the water to the high place in easily. > Improvement for durability of the silicon tube as minimizing the coefficient of the friction by 4 units of revolving roller. > Controling VR adoption which can control the pumping volumes in easily from outside by controling the motor speed. > Precise Humidification Controlling Function as humidify by pumping a minute quantity of water. > FND display function of current temperature and humidity. > Natural Humidification Method without albinism. ( using the evaporating pad ). > Prevention flow backward of water by using the high reliability Tubing Pumping method. > Rising in reliability for the measurement values by adopting the third generation temperature and humidity sensor.(Sensirion in Swiss) > Compact size to be applied easily for the other equipments. > Electric safety by 12V adaptor low voltage( except the heater inputting voltage). ★ > Forcing pumping function (possible to operate for two minutes) by simple function. [ ★ marks are only for APS PRO D.I.Y 1

* Heater for DIY is sold seperately. OPTIONAL PARTS