IntelliDose Automatically manage your nutrient and pH levels, set remote alarms and data log your progress with this one simple machine! Autogrow’s IntelliDose sets the industry standard for auto dosing. Dose up to a 9 part blend (nutrients, additives, pH adjuster) while maintaining your preset EC and pH settings. The large, interactive screen allows you to easily move between calibrating, set points, alarms and configuration. If you can program a number into a cell phone, you can program your IntelliDose. Run up to four irrigation stations The IntelliDose can run up to four irrigation stations, allowing different areas of your grow space to be watered on different schedules. Use one reservoir or have a pump feed each station at different times. You can also set your system to only irrigate during the daytime. Works with any nutrient line Any nutrient line can be used with the IntelliDose - liquid or powder. Simply determine your proper dilution ratios (don’t worry, we can help) and the IntelliDose will keep the reservoir at your perfect recipe 24/7. Operate with or without a PC While the IntelliDose has the ability to connect to a PC, this is only required for using advanced features like datalogging, remote access, scheduling and alarms. An offline option is available for growers who do not wish to connect to the internet. Additional features like remote access and alarms can be turned on at anytime simply by connecting your controller to a PC. Set your schedule once and forget it Using the IntelliDose, you can set up your entire nutrient schedule in one go. Making changes to schedules is easy and schedules can be saved for future use. Scheduling out your nutrients allows you to make changes in your reservoir as often as needed without having to be onsite. Unlimited data logging Using the IntelliDose you can data log your nutrient levels, pH levels and reservoir temperatures. This data can be exported into Excel for further analysis. Solenoids or peristaltic pumps Solenoids are gravity-fed valves that deliver nutrients, additives and pH adjuster to your reservoir. Though solenoids are less expensive, they can be more timeconsuming to use. The buckets of solution must be at least 5 feet high to activate the gravity-fed valves, increasing the chance of leaks and plumbing issues. Solenoids must also be cleaned every 4-6 weeks to function properly. Peristaltic pumps, though a bit more expensive, are the better long term investment. The pump system means you can set buckets of solution on the ground, allowing for a much larger quantities of pre-mixed solutions. This also lowers the possibility of leaks and spills. Maintenance on the peristaltic pumps is minimal and is usually just a once a year tubing swap. Access from anywhere You can log into the software and make changes, check your set points, enable or disable the pumps, etc. You can have the IntelliDose text or email you if a setting goes outside your parameters. www.autogrow.com | phone 707-206-2220 | [email protected]

IntelliDose Specs • 9 outputs 24VDC (or same voltage as supplied by plug pack) • Nutrient measurement units EC, CF or TDS (500/640/700) • Measured range 0.00 to 9.99EC, 0.1 to 99.99CF, 0 to 7000PPM • Nutrient resolution to .01mS/cm, 0.1CF • Nutrient measurement accuracy +/-0.1EC, 1.0CF or 10PPM (Temperature compensated) • Nutrient dosing range 0.00 to 5.99EC, 0.1 to 59.9CF, 0 to 4200PPM • pH resolution and accuracy - 0.1pH • pH measurement range 2pH to 12pH • Nutrient and pH dosing times settable from 1 second to 30 minutes • Dosing interval settable from 0 minutes (continuous dosing) to 30...