Catalogs >
AZUD >
AZUD LUXON LCA

AZUD LUXON LCA
1 / 2Pages

Catalog excerpts

Automatic hydraulic screen ﬁlters suitable for all applications, and available in a wide range of micron sizes, all with the same high quality guarantee of AZUD. Energy Efﬁcient: The consumption of water in the ﬂushing cycle is minimal. Wide selection of screens: Filtration degrees 80, 100, 125, 200, 300, 500 and 1000 micron. Versatility: Inlet/Outlet from 2" to 10" // 50-250 mm. Resistance: Temperatures to 60 ºC (140 ºF). Large screen area: Up to 7200 cm2 (1116 in2). Resistant material: The screen is manufactured in high quality stainless steel. Time saving: The ﬁltration process and the ﬂushing cycle occur simultaneously. Easy installation: The ﬁlters are delivered to be installed. TECHNOLOGY AZUD LUXON ﬁlters continue to supply ﬁltered water without interruption during the ﬂushing cycle. The water ﬂows through the inlet (1) and enters the inside of the ﬁlter element. The water then passes through the screen (2), and the particles are retained on the inside of the ﬁlter element (screen). The ﬁltered water then ﬂows out through the outlet (3). When the pressure differential from inlet to outlet of the ﬁlter reaches the pre-selected level the ﬂushing cycle starts (∆P). A hydraulic valve opens in the drain port, which initiates suction in the inner nozzles (4). This, along with the helical movement up and down the screen sucks the captured particles into the waste ﬂow, and this is expelled out the drain port (5). T h e l e n g t h o f t h e ﬂ u s h cy cl e i s pre-determined by the control unit. When the cycle is complete the ﬂush valve closes and the ﬂushing ends. The ﬂushing process uses a minim

Open the catalog to page 1

AZUD LUXONAZUD LUXON LCAMATERIALS OF CONSTRUCTION Model Filtration Element Cleaning Mechanism Seals Drainage Valve Epoxy-polyester coated carbon steel (S-235-JR) Stainless Steel 316L screen Molded PP support structure PVC NBR Reinforced polyamide Battery or 220 V AC control unit included. Max. Pressure 10 bar / 145 psi • Min. Pressure 2.5 bar / 36.3 psi Max. Temperature 60 °C / 140 °F 5<pH<9 All models are with flange connections DIN 2576 Ask for the rest of configurations in www.azud.com

Open the catalog to page 2