ADVANTAGES Energy Efficient: The consumption of water in the flushing cycle is minimal. Automatic electric screen filters suitable for all applications, and available in a wide range of micron sizes, all with the same high quality guarantee of AZUD. Wide selection of screens: Screens available from 10 to 1000 micron (SS support), 80 to 1000 micron (M.S. support). Versatility: Inlet/Outlet from 2" to 16" // 50 to 400 mm. Resistance: Temperature to 60 ºC (140 ºF). Large screen area: Up to 21300 cm2 (3300 in2). Resistant material: The screen is made in stainless steel of high quality resistant to corrosion. Time saving: The filtration process and the flushing cycle occur simultaneously. Easy installation: The filters are delivered to be installed. There are solutions available for working with pressures higher than 10 bar / 145 psi or saline water. Control unit is included. TECHNOLOGY AZUD LUXON filters continue to supply filtered water without interruption during the flushing cycle. The water flows through the inlet (1) and enters the inside of the filter element. The water then passes through the screen (2), and the particles are retained on the inside of the filter element (screen). The filtered water then flows out through the outlet (3). When the pressure differential from inlet to outlet of the filter reaches the pre-selected level the flushing cycle starts (∆P). A hydraulic valve opens in the drain port, which initiates suction in the inner nozzles (4). This, along with the helical movement up and down the screen sucks the captured particles into the waste flow, and this is expelled out the drain port. (5) The length of the flush cycle is pre-determined by the control unit. When the cycle is complete the flush valve closes and the flushing ends. The flushing process uses a minim

Filtration Surface "AZU'D LUXON'LDB' 10600 S/1'0"" "AZU'D LUXON'LDB' 13200 S/1'0"" AZUD LUXON "AZ'UD'LU'XO'N "aZud'LU'Xo'n "AZ'UD'LU'XO'N 'AZ'UD'LU'XO'N Filtration Element Cleaning Mechanism Seals Exhaust Valve Epoxy-Polyester coated carbon steel S-235-JR EPOXY-POLYESTER coated) Stainless Steel AISI-316L screen Stainless Steel AISI-316L or molded screen support structure Stainless Steel AISI-304 scanner NBR Reinforced polyamide - metallic + technical plastic Flushing control unit included 220 V AC. 380 V AC available. Max. Pressure 10 bar 7 145 psi • Min. Pressure 2 bar 7 29 psi Max. Temperature...