EngineMonitorMini
2Pages

EngineMonitorMini Display unit for industrial engines with J1939 interface EngineMonitorMini Product Overview The EngineMonitorMini is a display and monitoring device for industrial engines with CAN-bus interface. Common messages to the SAE J1939 standard are supported. The CAN messages transmitted from the engine are evaluated in the EngineMonitorMini and displayed. The integrated fault diagnosis allows the discovery of possible errors of the engine (e.g. broken wire speed sensor). Thus, conventional analog or digital display instruments can be replaced or retrofitted. Illustration 1: Exemplary Illustration of data shown on the display Folgende Informationen werden dargestellt: Engine Speed Engine Coolant Temperature Engine Percent Load at Current Speed Battery Potential (Voltage) Engine Coolant Temperature Actual Engine Percent Torque Engine Instantaneous Fuel Economy Engine Oil Pressure Engine Total Hours of Operation Accelerator Pedal Position Alle Daten bei 25°C Umgebungstemperatur, falls nicht anders angegeben. / All data at nominal input and 25° C ambient temperature, if not marked otherwise.  Alle Daten dienen nur Informationszwecken und sind nicht als zugesicherte Eigenschaften aufzufassen. / All data for information purposes only, no assured characteristics.  Technische Änderungen ohne vorherige Ankündigung sowie Irrtümer vorbehalten. / Technical modifications without notice and errors reserved.  Belastung mit Extremwerten über einen längeren Zeitraum kann die Zuverlässigkeit beeinflussen. / Strain with extreme values for a longer period may affect the reliability.  Alle Trademarks und Logos sind Eigentum der jeweiligen Unternehmen. / All trademarks and logos are property of the concerning companies. © b-plus GmbH ▪ Jul-14 ▪ Version: 1.4 b-plus GmbH ▪ Ulrichsberger Straße 17 ▪ D-94469 Deggendorf ▪ Tel. +49 991 270302-0 ▪ Fax -99 ▪ service

EngineMonitorMini Display unit for industrial engines with J1939 interface Hardware specification Protocol  SAE J1939 – ISO 11898 – HighSpeed-CAN / 5V Basis / 250 kBaud Dimensions (W x H x D)  87,5 x 87,5 x37,7 mm Display  TFT LCD Color-Display, 57,6 x 43,2 mm (active area), 2,8" diagonal Protection class  IP 67 (at the front in assembled state, otherwise IP 65) Operating temperature  -20 … +70°C Storage temperature  -30 … +80°C Operating voltage  8…31 V DC Power consumption  70 mA (at 24 V DC) Exemplary Illustrations Illustration 2: Engine Speed, Engine Coolant Temperature an d...