*myagriexpo

DRY-MATE ™

Product catalog summary

Introduction
The document provides an overview of the Dry-Mate™ Dry-Disconnects, highlighting their efficiency in reducing spillage compared to standard valves. It emphasizes the importance of minimizing fluid loss and maintaining safety during disconnections.

Spillage Reduction
Dry-Mate™ significantly reduces spillage from 8.45 oz. (250 mL) with standard 2″ valves to 0.1 oz. (3 mL). This reduction can save over 118 gallons (450 liters) per year, equivalent to filling the gas tanks of eight mid-size cars.

Product Specifications

Stainless Steel Dry-Mate: Made from 316 stainless steel, available in sizes 1″ FP, 1½″ FP, 2″, and 2″ FP. It features FKM, EPDM, or Kalrez® face seals, PTFE ball seats, and operates at a maximum pressure of 100 PSI (1″ FP, 1½″ FP, 2″) and 300 PSI (2″ FP). The maximum operating temperature is 300ºF.
Polypropylene Dry-Mate: Lightweight with sizes 1½″ FP, 2″, 2″ FP, and 3″ FP. It offers a wide range of chemical resistances, operates at 100 PSI, and has a temperature range of -20 °F to 150°F at 70 PSI.

Safety and Maintenance
Dry-Mate™ ensures minimal leakage, enhancing worker safety by reducing exposure to harmful chemicals. It also lowers maintenance costs by containing fluids and reducing the need for spillage run-off management.

Economic Efficiency
By minimizing spillage, Dry-Mate™ helps in conserving product, thus saving money. The design prevents accidental separation during fluid flow, avoiding costly mishaps.

Additional Resources
For more information on Dry-Disconnect products and chemical resistance options, visit BanjoCorp.com or scan the provided QR codes.

Catalog excerpts

D RY- M AT E ™ S E A L S T I G H T, M I N I M I Z I N G AND KEEPING COSTLY, POTENTIALLY H 3 1 6 STAIN L ESS STEEL D RY- M AT E STAINLESS STEEL FEATURES • 316 heavy duty stainless steel construction • Size options: 1″ FP, 1½″ FP, 2″ & 2″ FP • FKM (Viton® type), EPDM or Kalrez® face seals • PTFE ball seats • 100 PSI maximum operating pressure (1″ FP, 1½″ FP, 2″) • 300 PSI maximum operating pressure (2″ FP) • 300ºF maximum operating temperature • Available in manifold flange connections • Spillage: 1″ FP & 1½″ FP = 1 mL, 2″ = 3 mL, 2″ FP = 3 mL N OT YOU R TYPIC AL SPIL L AG E 99% SPILLAGE REDUCTION...

Open the catalog to page 2

G FLUID LOSS WHEN DISCONNECTING ARMFUL PRODUCT WHERE IT BELONGS SAFETY FIRST Product is important, but the safety of your workers is essential. With Dry-Mate Dry-Disconnects, leakage from disconnecting is miniscule compared to standard valves. When properly installed and operated, the danger posed by harmful chemicals contacting your workers is greatly reduced. EVERY DROP COUNTS P OLY P R OPYL ENE DRY-MATE POLYPROPYLENE FEATURES • Lightweight • Size options: 1½″ FP, 2″, 2″ FP & 3″ FP • Wide range of chemical resistances • FKM (Viton® type), EPDM or Kalrez® face seals • 100 PSI maximum operating...

Open the catalog to page 3

DRY-MATE MODELS 2″ STANDARD PORT STAINLESS STEEL DRY-MATE OPTIONS SELECT PROPER VALVE MATERIAL To view a full listing of our Chemical Resistance Chart, scan this QR code or visit: To learn more about our Dry-Disconnect product line, scan this QR code or visit: BANJO CORPORATION A Unit of IDEX Corporation 150 Banjo Drive Crawfordsville, IN 47933 U.S.A. Telephone: (765) 362-7367 Fax: (765) 362-0744 banjocorp.com © Copyright 2016 Banjo Corporation. All Rights Reserved. |

Open the catalog to page 4

DRY-MATE ™

DRY-MATE ™

Catalog excerpts

All Banjo Corporation catalogs and technical brochures