MAGNUM
19Pages

Long Shaft Pump Magnum LP / LE

Introduction Thank you very much for purchasing a BAUER Long Shaft Pump! We have pleasure to present to you a BAUER long shaft pump that features state-of-art technology and top quality. This manual describes how to operate and maintain your BAUER long shaft pump. For reasons of clearness and due to the many possibilities, this manual does not contain everything down into detail. In particular, it cannot possibly deal with every conceivable aspect of operation and maintenance. If you need further information or if you are faced with any special problem for which this manual does not give...

Product details Type designation: Long shaft pump Type number: Serial number : Name: Address: Röhren- und Pumpenwerk BAUER Ges.m.b.H. Kowaldstr. 2 A - 8570 Voitsberg Tel.: +43 3142 200 - 0 Fax: +43 3142 200 –320 /-340 www.bauer-at.com Name: Address: ph. / Fax: Note: Please make a note of the type and serial number of your long shaft pump and its accessories! Be sure to specify these details every time you contact your dealer. In all warranty claims and correspondence relating to this machine it is essential to specify the complete serial number group including all letters. This applies to...

General safety instructions Symbols and terms The CE symbol that has to be affixed on the machine by the manufacturer outwardly demonstrates compliance of the machine with the directives for machines and other relevant EU directives. This “Warning” symbol refers to important safety instructions in this manual. Whenever you see this symbol be aware of possible injury hazards. Read the note following the symbol very carefully and inform the other operators accordingly.. Non-observance of this instruction may cause damage to or destroy the machine or individual components.. It is important to...

Operating Manual for BAUER Long Shaft Pump / Version IX-2008

General instructions for safety and accident prevention Check the machine for operational safety before every start-up. 1. In addition to the instructions contained in this manual, all specifications generally valid for safety and accident prevention must be observed! 2. The warning and instruction signs affixed to the machine give very important instructions for safe operation. Observing them serves your own personal safety! 3. Never put the machine into operation unless all guards and safety devices are completely mounted and in their proper working position! 4. Acquaint yourself with all...

Trailed machines 1. When a machine is coupled to the drawbar make sure that the coupling point provides sufficient flexibility! Power take-off (applies only to PTO driven machines) 1. It is not allowed to use any other types of PTO drive shafts except those prescribed by the manufacturer! 2. Drive shaft guard tube and guard cone as well as the PTO guard – also on the machine side - must be mounted and in good working order! 3. When using a PTO drive shaft always observe the specified overlap in transport and working position! 4. Never connect or disconnect the PTO drive shaft unless the PTO...

Hand-operated devices (valves) 1. Because of the slurry gasses produced in the lines, no slurry is allowed to remain in closed pipelines – bursting hazard! 2. Lay the pipelines with sufficient inclination and make sure that the selected closing order of valves allows all lines to be drained completely! 3. Protect the valves against unauthorised handling! 4. If a valve gets jammed do not apply force! Use only the operating levers supplied with the implement! 5. Observe the permissible maximum operating pressure of valves and pipelines when pumps are operated! 6. Service only when the tanks...

2 GENERAL BAUER products are designed and manufactured carefully and subject to a system of continuous quality control. MAGNUM slurry pumps fully meet the requirements of the agricultural practice. They are best suited for delivering all kinds of slurries from thin liquid manure to viscous mixtures containing solids such as straw, fibres or clots. A special chopper guarantees trouble-free performance without blockages. Short set-up times, easy handling and maximum performance reliability are further advantages of this pump series. Pump drive is electric by means of a three-phase submersible...

3 DESCRIPTION The long shaft pump MAGNUM LE consists of a pump with a robust cutter and a top draw-in, the drive pipe running in oil bath and a drive shaft with multiple bearings. The riser pipe can be equipped with one or two stirring nozzles and is also available without a stirring nozzle The stirring nozzle is mounted on a pivot together with the three-way cock and has the function to destroy the floating layer and to homogenise the slurry. It can be vertically and horizontally turned via rods with a lever. Changing from mixing to pumping is also done via a lever with rods with a rotary...

Insert the pump with the drive pipe showing downward into the support of the lift pole.. Fold up the support fork and lock with the stop pin. Mount the guiding clamp(s) again with the locking lever. Take off the cable pulley from the drive pipe of the pump (by detaching the split pin). Slightly unwind the cable on the cable winch and insert into the cable pulley and push it back onto the bolt, then secure with disc and split pin. If the locking lever is lifted or not engaged, move the pump with the cable winch until it rests in the gap ... The pump is now ready for operation. Operating...

5 Transport For transport the lift pole with pump is linked to the trailer hitch of the tractor through a push-on drawbar . or hung into the tractor hydraulic system. For this purpose, detach the drawbar. Connect the bolts of the lifting pole to the lower hinged arms of the tractor hydraulic system (secure with the split pin) or hook in the tool bar directly below the two hooks. 6 Setting up with the lift pole Approach the pit/ pit opening with the pump at the rear. Operating Manual for BAUER Long Shaft Pump / Version IX-2008