Seco Duplex 2021
1 / 24Pages

DOUBLE-BLADE MOWERS LIGHTWEIGHT - GENTLE ON FORAGE - LOW ENERGY CONSUMPTION SECO DUPLEX

STRONG ARGUMENTS Advantages of the double blade mower Minimum power requirement The power requirement of less than 2 hp / meter operating width measured by the Federal Institute for Agricultural Engineering (BLT) Wieselburg, Austria, illustrates the low energy input required for powerful mowing. A double blade mower combination with 9 meters has a power input of 18 hp, a disc mower requires about 5 times this drive power. Minimum ground pressure Double-blade mowers are significantly lighter than rotary mowers due to their design. They have a weight of about only one third of that. Soil...

STRONG ARGUMENTS Clean forage Forage contamination is significantly lower when mowing with double-blade mowers than when mowing with rotary mowers because contamination, e.g. from a molehill, is not distributed throughout the forage. Perfect forage deposit During mowing with the double-knife mower, the forage is deposited completely homogeneously and evenly on the surface. The result is excellent drying behavior of the forage, and turning can be significantly reduced. Safe matter With the double-blade mower, unlike rotary mowers, there is no risk of foreign bodies, such as stones, being...

STRONG ARGUMENTS Double-blade mowers from BB - Umwelttechnik The ideal alternative. Long lifetime of the blades Since the correct ratio of travel speed and knife cutting speed is a very important factor for a long lifetime of the knives, we have developed a revolution counter with integrated operating hours counter, which always reflects the speed of the cutterbar drive. A table showing the parameters of the appropriate relationship between ground speed and cutterbar drive speed helps to adjust the rpm or the driving speed. Anything else is a "blind flight" when mowing with a double-blade...

STRONG ARGUMENTS Overload protection When the cutterbar makes contact with an object, the mower reliably deflects to the rear / upwards. The pressure relief valve of the hydraulic drives is set so that the cutterbar stops if a foreign object gets into the knife. This prevents damage to the cutterbar. Own oil supply Basically, all BB - Umwelttechnik doubleblade mowers are equipped with their own oil supply. A large-volume hydraulic oil tank, return flow filter and large-dimensioned pipes ensure reliable drive of the cutterbar. Optionally, the solo mowers can also be operated via the...

FRONT MOWER ECO Weiste triangular ■ NEW! attachment CAT 2attachment incl. threepoint unit with Carbodux knife blades ■ Bidux cuttingblade spacing and unequal ■ Parking supports relief valve ■ Adjustable pressureoverload protects the cutting unit in case of ■ With skids (cutting heights of 4-20 cm freely selectable) with own oil supply, PTO 1,000 ■ Drive(rotation direction of thei.e. via frontclockwise as PTO shaft: rpm seen in the driving direction); operating speed of the PTO shaft during mowing: approx. 700 rpm without own i.e. via ■ Alternative:ofDrivecarrier vehicle;oil supply,...

Swath drums, small (Ø 50 cm)  or large (Ø 70 cm) Swath boards, small or large Three-point attachment CAT 1 Instead of Weiste triangular attachment Three-point attachment CAT 1+2 with integrated pendulum support  Reverse and transmission gear unit  Only combinable with pendulum support version Speed change from 540 to 1,000 rpm with or without reversal of rotation direction or only reversal of rotation direction possible Change of rotation direction of PTO shaft Different PTO speed Revolution counter, digital and illuminated  For monitoring the optimum cutting speed; with integrated...

FRONT MOWER STANDARD Weiste triangular ■ NEW! attachment CAT 2attachment incl. threepoint unit with Carbodux knife blades ■ Bidux cuttingblade spacing and unequal ■ Parking supports ■ Stable frame relief valve ■ Adjustable pressureoverload protects the cutting unit in case of ■ With skids (cutting heights of 4-20 cm freely selectable) with own oil supply, PTO 1,000 ■ Drive(rotation direction of thei.e. via frontclockwise as PTO shaft: rpm seen in the driving direction); operating speed of the PTO shaft during mowing: approx. 700 rpm without own i.e. via ■ Alternative:ofdrivecarrier...

FRONT MOWER STANDARD Swath drums, small (Ø 50 cm) or large Technical data Instead of Weiste triangular attachment Road traffic regulation set with LED position lights, LED turn signals and warning signs  PTO shaft  Flip-away mechanism  Cannot combined with swath drums! Swath boards, small  or large Oil cooler, temperature controlled Revolution counter , digital and illuminated For monitoring the optimum cutting speed; with integrated operating hours counter Additional relief springs Change of rotation direction of PTO shaft Different PTO speed Special frame for mowing very high...

SIDE MOWER FRONT STANDARD Weiste triangular ■ NEW! attachment CAT 2attachment incl. threepoint unit with Carbodux knife blades ■ Bidux cuttingblade spacing and unequal ■ Own cutting unit lift via mower‘s own hydraulic cylinders with single-acting control unit ■ Intelligent and adjustable collision protection ■ Parking supports relief valve ■ Adjustable pressureoverload protects the cutting unit in case of skids heights cm ■ Withcutting(cutting3.35 m: of 4-20bar freely selectable) For unit with reinforcement ■ Cutting unit can be shifted sideways on frame, thus easy adaptation to carrier...

SIDE MOWER FRONT STANDARD Reverse and transmission gear unit  Speed change from 540 to 1,000 rpm with or without reversal of rotation direction or only reversal of rotation direction possible Change of rotation direction of PTO shaft Oil cooler, temperature controlled  Different PTO speed PTO shaft Swath board, large Road traffic regulation set with LED position lights, LED turn signals and warning signs Revolution counter , digital and illuminated For monitoring the optimum cutting speed; with integrated operating hours counter Feeler wheel under the drive shoe of the side cutting unit...