Technical Specifications of Motor Reaper-Binder 280
Engine: The Motor Reaper-Binder 280 is equipped with a Lombardini 3LD510 diesel engine. It features a single cylinder with a displacement of 510 cm3 and delivers a maximum power of 12.2 hp (9 kW) at a nominal speed of 3000 rpm. The engine is air-cooled and started via a recoil mechanism.
Transmission: The machine uses a constant mesh gearbox with a dry single plate clutch controlled by a pedal. It offers four forward speeds (5.5, 7.5, 10, and 14.2 km/h) and one reverse speed (6 km/h). A differential lock is operated by a lever.
Brakes: The service brake is a special type with a bronze inner ring in a grease bath, operated by a pedal with cable transmission. The parking brake uses a locking control on the service brake pedals.
Driving Position: The steering is managed by a steering wheel operating on the rear wheels, and the seat has longitudinal adjustment capabilities.
Power Take Off: Engagement is managed by a lever clutch located to the right of the engine, with gear transmission.
Hydraulic System: The system includes a gear pump and a single-effect cylinder.
Tyres: The front tyres are either 4.50-19 or 6.00-16, while the rear tyres are 4.00-12.
Cutter Width: The cutter width is 1400 mm.
Weight and Dimensions: The machine weighs approximately 450 kg. Its dimensions are 3600 mm in length, 1950 mm in width, and 2300 mm in height.
Additional Information: BCS is a brand of the BCS Group, located in Abbiategrasso, Milano. The specifications provided are subject to change without notice by the manufacturer.
See more