NEW ROTEX MACHINES FOR MODERN COMPANIES BCS has been designing and manufacturing lawn mowers and garden machinery since 1943, the year of its establishment. The success of these machines and the experience gained over years, also due to the continuous and constant contact with the customers allowed BCS to produce the new range of mowers and rear mounted mower-conditioners type Rotex XT and Rotex XR, to get a top quality forage, with high nutritional value. Destined to the market of average/large surfaces and therefore to an intensive agriculture steadily engaged in the search for performing machines,...

10 REASONS TO CHOOSE ROTEX XT DISK MOWERS Disc-holding flanges with torque limiter and shearpins to protect internal components. Wear-resistant skids for a lower resistance to inching. Conveyor cones and adjustable tier boards for an easier swathing of cut grass. Crossbar with reinforced couplings to reduce stresses on the structure and increase resistance. Very good balancing and lightening so that the cutter bar can follow the ground contour in the best way. Baffles to protect the cutter bar and keep the cutting area clean. Impact preventing safety unlock device to avoid any damage to the cutter...

FRAME AND STRUCTURE Impact preventing safety unlock device Rotex XT and XR are equipped with an impact-preventing safety unlock device, to avoid any damage to the cutter bar: in case of strong bumps against an obstacle, the device partially retracts and lifts the cutter bar. To continue working, just move a bit in reverse. Simple and precise kinematic movements The standard hydraulic lifting is used to ease cutter bar during end of field manoeuvres, lifting it to +90° (in vertical direction) during road transfers or facilitating work on steep banks and ditches until -35° versus the horizontal...

CUTTING UNIT Strong and reliable transmission Discs and wear-resistant skids Rotex XT and XR were designed to bear heavy duty conditions all the time; the cutter bar is formed by top quality and highly resistant components, but, at the same time its contour is limited: this optimises penetration in all types of forage, even if thick and laid-down, ensuring regular discharge of cut grass without any danger of clogging. The oval discs, in special steel and with cleaning flaps achieve an optimal flow of forage and high wear resistance. The special wear skids in special high-resistance boron/manganese...

10 REASONS TO CHOOSE ROTEX XR MOWER-CONDITIONERS Protection canvas surrounded by plastic impact-preventing guards. Adjustment of the conditioning pressure with possibility of preventing conditioning. Mower-conditioner working on the whole working width to process forage homogeneously. Upper swinging roller for foreign body ejection. Hydraulic lifting to adjust the bar height directly from the driver’s seat. Balancing of the cutter bar through adjustable springs on both ends. Discs with cleaning fins and disc-holding flanges with torque limiter. Cutter bar with oil bath gear drive. Minimum power...

CONDITIONING UNIT Saving time while keeping the top nutritional value Smooth conditioning Roller conditioning occurs through squeezing and crushing of tree stalks to cut the waxy film and release moisture, thus favouring the drying process and preserving the leaves rich in nutritional substances. This roller conditioning system allows the operator to reduce the drying time of the forage by up to 50%. The appreciable saving on time and the lesser danger of exposing the processed product to bad weather work to the advantage of the quality of the forage, which preserves its nutritional characteristics....

Rear mounted disc mowers TECHNICAL FEATURES Number of discs Cutting width (mm) Min./max. swath width (mm) Weight (kg) PTO power (kW/hp) Rear mounted mower-conditioners Adjustable frame with linkage categories 1 and 2 standard outfit Tractor PTO rotation speed Nodular cast iron control support standard outfit Transmission Disc rotation with gears in oil bath counter-rotating Disc holding flanges with torque limiter normal or counter-rotating standard outfit Conveying cones standard outfit, on the first and last disc Adjustable swath boards standard outfit, with one external swathing wheel Wear...

A team of specialists, well prepared and available to assure an efficient and resolving service. A precise certainty for the customer’s satisfaction: 2-year warranty included in the price. We recommend to use the original PowerLube lubricants. BCS S.p.A. Viale Mazzini, 161 20081 Abbiategrasso (Milano) Tel. +39 02 94821 Fax +39 02 94960800 [email protected] SPARE PARTS A complete range of original spare parts, guaranteed directly by the manufacturer. The information in this leaflet is not binding: the models described may be modified, without notice, by the Manufacturer.