Plastic Super Claus buckets The Super Claus buckets are deeper than the ,regular‘ Claus buckets, although they are equally suitable for elevators with higher belt speeds. This elevator bucket lends itself particularly well to light-weight and/or wet materials. Bechtel supplies the Super Claus in PEHD or nylon. Super Claus elevator buckets made of plastic (parameters in mm) Type Size/weight Volume Holes Max. Z2 = gross volume in liters, Z3 = net volume in liters. [email protected] www.bechtel-wuppertal.de

Super Claus Elevator buckets Super Claus elevator buckets made of steel/stainless steel (parameters in mm) Type Size/weight Volume Holes Max. Z2 = gross volume in liters, Z3 = net volume in liters. [email protected] www.bechtel-wuppertal.de

BECHTEL GmbH The following capacity table is based on the maximum number of buckets per meter and a gross volume in liters of the elevator bucket, resulting in a certain capacity in M3 per hour. Gross Super Claus capacity table (Zone 2) Type number gross liter belt speed in m per sec

BECHTEL GmbH The following capacity table is based on the maximum number of buckets per meter and a net volume in liters of the elevator bucket, resulting in a certain capacity in M3 per hour. Net Super Claus capacity table (Zone 3) Type number net liter belt speed in m per sec

BECHTEL GmbH The following tables show the basic sizes of elevators with Claus resp. Super Claus elevator buckets. These sizes are minimum parameters. Elevator shaft sizes for Claus elevator buckets Type ABCDEFGH I

Basic size Claus The elevator head and foot sizes may be calculated using the following equations. The next page shows the corresponding elevator drawing. Basic sizes for the elevator head and foot with Claus resp. Super Claus elevator buckets Elevator head sizes Elevator foot sizes (The highest number of 1 or 2 is to be used) 50 mm + 7 + 6 + 5 + 1/3 of the pulley diameter to be added 50 mm + 1/3 pulley diameter under Sizes of the elevator head and foot for steel elevator buckets (parameters in mm) Steel C100- 90 Sizes of the elevator head and foot for plastic elevator buckets (parameters in...

Basic size Claus Basic parameters of an elevator with Claus resp. Super Claus elevator buckets. The elevator head and foot sizes may be calculated using the mentioned equations and tables. For lifting heights between 31 and 70 meters, parameter 3 must be increased by 1/3. = flower, pellets, and powders H4 and H6 = dry granulates H5 and H7 = wet and powder products, [email protected] www.bechtel-wuppertal.de

The following table shows the pulley diameters for the Claus bucket type. The table also lists the corresponding minimum and maximum belt speeds for Claus buckets. Pulleys for Claus elevator buckets (parameters in mm) Type Claus Pulley Minimum Maximumdiameter speed (m/s) speed (m/s) C100 - C120 250 [email protected] www.bechtel-wuppertal.de