STREIGEL-PRO PE, PN
13Pages

STRAW HARROW STRIEGEL-PRO PE, PN Straw Harrow for Precise Farming

Why STRIEGEL-PRO? The STRIEGEL-PRO are straw harrows through which High daily outputs are possible thanks to the sophisticated the BEDNAR Company responds to the growing of yields and construction of the STRIEGEL-PRO straw harrows. increased need of quality stubble cultivation immediately after STRIEGEL-PRO can work at an operating speed of 15 km/h methods of soil processing, plant protection, plant nutrition harvest, before the soil is processed for the following crop. and above, with a large working width, while aggregated and also new effective hybrids. The increasing yields also mean...

WORK AFTER WINTER WHEAT – STRIEGEL‑PRO PN 9000 – Yield: 11,2 t/ha – Number of passes: 1 TECHNICAL ADVANTAGES AGRONOMIC ADVANTAGES – Cutting coulters for disrupting stems and stubble – Management of crop residues – uniform distribution – Operating speed: 18 km/h – Fuel consumption: 3 L /ha residues, Trash Cutter rollers or hydraulic crush bar leveller for spring preparation. – 6 rows of tines with large overlap guarantee a good distribution of material (Model PN has 5 rows of tines). – Independent working angles of the first section (4 rows of tines) and the second section (2 rows of tines)....

BENEFITS THAT BRING SAVINGS: – Quality distribution of post-harvest residues at low fuel – Cutting and spreading crop residues, including residues consumption. – The large operating width of the machine and high working speed achieves high daily outputs with the machine. – Quality distribution of crop residues after harvest and soil levelling and warming up in spring at low fuel consumption. – Possibility also to work under very moist conditions thanks to the construction of the machine without rollers. after desiccated rapeseed. – Fast and cheap start-up of second growth of small seeds,...

Side wind makes the work of the combine straw chopper worse. HIGHER CROPS, WIDER CUTTING PLATFORMS OF COMBINE HARVESTERS THE VOLUME OF CROP RESIDUES INCREASES WITH THE YIELD In addition to higher crops, we should also mention the of concentrated crop residues behind the harvester, which Five years ago, we used to harvest 5.5 t/ha (of cereals) we work with 6.8 t/ha of crop residues. We have to process increasing capacity of combine harvesters. Contemporary subsequently affects stubble cultivation and causes uneven and now we often harvest 8.5 t/ha, and some even more, and incorporate...

Application SECOND GROWTH CONTROL The BEDNAR STRIEGEL-PRO harrows are an ideal tool for The BEDNAR STRIEGEL-PRO harrows can be connected a fast and controlled start of the second growth, particularly to FERTI-BOX, a hopper for fertilizer or seeds. The fertilizer/ the second growth of small seeds such as rapeseed. seeds are delivered pneumatically to the working sections The tines superficially mix the seeds (small seeds) with of the harrows. This connection provides, for example, the soil. The second growth emerges fast and evenly on the entire plot. Subsequently, it can be destroyed...

Application GRASS TREATMENT EARLY SPRING SOIL PREPARATION STRIEGEL-PRO is very suitable for the maintenance and STRIEGEL-PRO is ideal for very early spring soil restoration of permanent grass. By using the straw harrows, preparation – to open, level and warm up the top soil layer. you will achieve: – better permeability of water, oxygen and nutrients for the grass, – recovery and thickening of grass, resulting in higher crop, – can also used for grass seedbed preparation. – The front hydraulic levelling Crushbar levels soil after previous autumn field operation. – The first four rows of...

Important Working Parts STRIEGEL‑PRO PE Hydraulic control of the tines operating angle Front hydraulically controlled accessories (coulters × levelling bar) Parallelogram suspension of working sections Hydraulic adjustment of rod thrust Track eradicators behind the machine and behind the tractor Last 2 rows of tines can work under a different angle Front Cutting Coulters / Front Cutting Roller Trash Cutter / Front Levelling Bar Crushbar 6 rows of tines SECTION ATTACHMENT PARALLELOGRAM TRACK ERADICATORS FRONT HYDRAULIC LEVELLING BAR – CRUSHBAR FRONT CUTTING COULTERS HYDRAULIC CONTROL OF THE...

Important Working Parts CRUSHBAR – FRONT LEVELLER CRUSHBAR is a front levelling bar with individual spring loading of each blade using a leaf spring. The working angle of the Crushbar is adjusted hydraulically from the tractor cabin. Application: Crushbar is ideal for levelling the surface in early front leveller CRUSHBAR tines spring. It can also be used for levelling a plot that has been cultivated already. FRONT CUTTING COULTERS are sharp front cutting discs that work on leaf springs. The profile of the coulters brings out soil that is subsequently mixed with crop residue. Application:...

STRIEGEL-PRO PN Compact mounted harrows designed for tractors from 80 horses to 180 horses. Operating width: 6.1m; 7.5m a 9m. Folding by two frames upwards. ALFA DRILL COMFORTABLE TRANSPORTATION The mounted model is simply folded The machine is close to the tractor up for the transport position using be equipped with the ALFA‑DRILL which provides comfortable seed hopper, allowing for wide sowing transportation on roads and field of, for example, cover crops. Working width Transport width Transport length Working depth* Number of tine rows Tine spacing Number of tines / points Total weight**...

STRIEGEL-PRO PE Compact mounted harrows designed for tractors from 230 horses to 400 horses. Operating width: 12m. Folding forward to the drawbar ALFA DRILL TELESCOPIC RODS The rods stabilize side frames during dimensions provide easy manipulation, equipped with the ALFA-DRILL seed work at high speed. They are included even in a narrow and difficult hopper with a capacity of up to in the basic equipment of the machine. terrain. The transport length of 800L, allowing for wide sowing of, for example, cover crops. COMPACT TRANSPORTATION DIMENSIONS STRIEGEL‑PRO PE PE 12000 Working width...