SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL
9Pages

{{requestButtons}}

Catalog excerpts

SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 1

A fast and high quality stubble tillage solution

Open the catalog to page 1
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 2

General description MAIN ADVANTAGES OF THE MACHINE AGRONOMIC ADVANTAGES OF THE MACHINE • Excellent machine stability without unwanted movement thanks to the well balanced centre of gravity. • The stubble cultivated immediately after the harvest takes advantage of the higher soil moisture content. • Operating speeds of 15 km/h or more thanks to the cleverly located axle. • Fast stubble tillage forms the foundation for a managed germination process of second growth and weeds following the harvest. • The set tillage depth is constantly maintained. The weight is distributed consistently on the...

Open the catalog to page 2
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 3

Cost savings benefits: • Quality tillage in one pass – one pass instead of many, quality cutting, mixing and incorporation of plant residue due in particular to the profiled aggressive A-discs. • Shallow and fast stubble tillage to stimulate volunteer plant and weed germination and prevent capillary action. • High operating speeds – means cutting costs and the number of hours spent out on the field. The high speeds are reached thanks to the high stability of the machine. • Large area capacity – SwifterDisc is a light disc cultivator which can be connected to tractors of lower output, while...

Open the catalog to page 3
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 4

Operating components Precise stubble cultivation Why should the cultivation be done immediately after the harvest Stable tillage, flat land The foundations for successful crop growth are laid when harvesting the previous crop. By tilling the stubble immediately after harvest, you can use the moistness of the soil, which was protected from the sun by the stems. Fast tilling ensures the reliable and even germination of volunteer plants and weeds. The basis for success here is a short interval between the harvest and sowing. Whether the farming is done by using a minimum-tillage system or a...

Open the catalog to page 4
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 5

Better quality work STEEL RING The basic SwifterDisc model is equipped with a tube packer. This kind of packer is a good value solution and is particularly suitable for light soils. The heavy steel ring packer is suited to all types of soils for aggressive consolidation and clot crumbling. The individual segments are made of special smear proof steel. The packers are equipped with adjustable scrapers. Blades with significant cutting capacity cr ot a Profiling creates more soil for incorporating plant residue The Roadpacker packer is a full bodied roller made of hard natural rubber and is...

Open the catalog to page 5
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 6

Major benefits Major benefits The tractor, not the tool, controls the operating speed… …with increasing speeds, the quality of work increases too! The integrated transport axle spreads the centre of gravity. The machine is perfectly stable Front supporting wheels mean greater stability and improved control at higher speeds Packers and crumbling rollers An exact working depth over the cultivator entire operating width… speed unlimited! The exact working depth is the same over the whole operating width thanks to the equal pressure which is applied to the discs, even at the edge of the...

Open the catalog to page 6
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 7

SWIFTERDISC XN series SWIFTERDISC XO F series BEDNAR SWIFTERDISC XN is a disc cultivator suitable for tractors ranging from 85 to 220 HP - mounted machine - operating widths of 3, 3.5, 4, 5, 6 m - rigid or folds upwards, having two side frames Recommended output* HP 85-115 110-130 130-150 130-150 150-180 180-220 *depends on soil conditions **depends on the machine accessories Working width Transport width Transport length Working depth* Number of discs Total weight** BEDNAR SWIFTERDISC XO_F is a disc cultivator suitable for tractors ranging from 120 to 320 HP - semi-mounted...

Open the catalog to page 7
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 8

SWIFTERDISC XE series BEDNAR SWIFTERDISC XE is a disc cultivator suitable for tractors ranging from 300 to 450 HP - a trailed machine - operating widths of 10 and 12 m - folds forwards along the drawbar TURN BY USING REAR PACKERS At the headlands, the machine can turn using the rear packers. Fast, easy, effective. DRILL MACHINE CORE BENEFITS Sows cover crops and grasses combines the workflows. Limits soil erosion Weed disposal Increases the nitrogen in the soil due to the cover crops. Improves the soil structure by intercropping. Increases biological activity. SWIFTERDISC *depends on soil...

Open the catalog to page 8
SWIFTERDISC XN, XO_F, XO_PROFI, XE, XE_PROFI, XE_MEGA+ALFA DRILL - 9

Product range BEDNAR FMT s.r.o. Lohenicka 607 190 17 Praha 9 - Vinor Czech Republic The technical data and illustrations are approximate. Reservations are made for any design changes. TILLAGE INTER-ROW CULTIVATION Trailed packers CUTTERPACK, PRESSPACK, GALAXY Inter-row cultivator ROW-MASTER ROTARY CUTTERS

Open the catalog to page 9

All BEDNAR FMT s.r.o. catalogs and technical brochures

  1. EFECTA CE

    15 Pages

  2. TERRALAND DO

    9 Pages

  3. ACTROS RO

    10 Pages

  4. KATOR KN

    2 Pages

  5. SWIFTER SE, SM

    11 Pages