CHISEL PLOUGHS TERRALAND TN, TN_PROFI, TO Increase the potential of your crops. Heal your fields.

TERRALAND TN_PROFI Why the TERRALAND? BEDNAR TERRALAND TN is a chisel plough which al- In contrast to traditional ploughs, TERRALAND chisel lows fast economic and high quality deep cultivation. It ploughs are able to till soil in the harshest conditions, was conceived as a full-value alternative to traditional to a greater depth whilst significantly cutting costs. The Jordbearbejdning with a higher daily output (operating speed low tensile resistance guarantees low fuel consumption, 6–12 km/h) and reduced energy consumption (up to 60 % the tine geometry even allows you to cultivate dry compared...

Why the TERRALAND? MAIN ADVANTAGES OF THE MACHINE AGRONOMIC ADVANTAGES OF THE MACHINE – The machine main frames are made of high strength – Loosens deeper than standard cultivators with Alform steel. – The triple ringed angle of the working tines ensures easy soil penetration and the ideal throughput of 65 cm), which results in the roots having access to more moisture. – There is more air in the soil which is needed to create the machine. – An extremely high machine throughout thanks to the a better soil climate. – Lower soil layers are not brought up to the higher soil frame clearance and a...

Usage TERRALAND IS USED FOR: – Deep loosening, breaking up the plough pan and – Incorporating a large amount of plant residue in one creating superior soil conditions for the subsequent pass, such as maize, oil seed rape… crops whilst restoring the soil climate – Incorporating digestates created in biogas stations. (more air, more water). – Working in very wet and soggy conditions, e.g. in – Incorporating livestock manure in a single pass of the machine. It can even incorporate livestock manure late autumn or winter. The TERRALAND has a high throughput. applied in large hectare doses. And much...

3 angles for easy work Water and air Sugar beet – growth stage “Beginning of crop cover” Corn – growth stage “Early whorl – 6 leaves” Oilseed rape – growth stage “Stem elongation” WHY ITS WORK IS INTENSIVE AND EFFECTIVE The machine breaks up the plough pan and the chisel tips reach right under this compacted layer. The soil in the upper soil profile is mixed intensively with the plant residue and is covered. These superior results are achieved thanks to the tines which are bent at 3 different angles: – The first angle is positioned in such a way as not to carry the lower soil layers (poor in...

More accessories, service, maintenance and setting up Operating components TERRALAND SAVES TIME AND MONEY MAINTENANCE-FREE REAR ROLLER BEARINGS 3POINT CATEGORY III./IV. LINKAGE Using the TERRALAND significantly reduces costs: SIDE ROLLERS The TERRALAND TN and TN_PROFI are connected to a tractor with a 3point linkage. The mounted model has the advantage of being easy to manouvre at the headlands and on the roads. The TERRALAND TN can be equipped with additional folding side rollers. These rollers prevent the formation of side ridges. The field stays level even at the sides of the machine. Multiple...

TERRALAND TN Terraland TN – the machine for large amounts of plant residue The TERRALAND TN is a mounted chisel plough suitable for tractors with 150 HP or greater (depending on soil conditions). The TN model comes in 2 versions, the TN_D model which allows for a maximum working depth of 65 cm, and the TN_M model which can reach a maximum working depth of 55 cm. The tine securing for both versions is either mechanical (tightening bolts) or hydraulic (hydraulic cylinders). The TN model can also be used during the summer; if you intend to sow afterwards, e.g. winter rape, we would recommend that...

TERRALAND TN_PROFI Terraland TN_PROFI and sowing TERRALAND TN_PROFI is a TERRALAND TN chisel plough with an additional 2 rows of self-cleaning cutter discs. The TERRALAND TN_PROFI, equipped with 2 rows of tines, tandem spiky rollers and a cutter disc section, is a machine which can create the right conditions for seed drills in just one pass. The cutter disc section finishes off the job and performs the following tasks: – Finely cuts clods, creating a soil structure which allows you to use a seed drill for sowing right after the TERRALAND TN_PROFI. – Covers and conceals plant residue in the soil...

TERRALAND TO work in extreme conditions thanks to the integrated axle The integrated axle located between the operating tines allows the machine to work without rear tandem rollers, with more tines working behind the transport wheels. In wet conditions, you can simply remove the rollers from operation and till the soil without rollers. Particularly when tilling in winter, the soil does not need to be compacted. Furthermore, with the axle located in the centre of the machine, it is more adept at turning at the headlands – a shorter turn radius. Tandem spiky rollers Robust hydraulic auto-reset...

Technical data Working width Working width Transport width Transport width Transport length Transport length Working depth* Working depth* Total weight** Total weight** Recommended output* Recommended output* * depends on soil conditions  ** depends on the machine accessories * depends on soil conditions  ** depends on the machine accessories Working width Working width Transport width Transport width Transport length Transport length Working depth* Working depth* Total weight** Total weight** Recommended output* Recommended output* * depends on soil conditions  ** depends on the machine ac

PRESSPACK a solution for heavy soils PRESSPACK PT is a trailed packer, consisting of 2 rows of self-cleaning steel rings, which can be used on its own or in combination with other BEDNAR machines. The sharp edges of the rings effectively break up clods regardless of soil conditions and level the surface so that the field is ready for sowing. The PRESSPACK’s heavy weight of 600 kg/m ensures that the packer effectively compacts the topsoil, preventing moisture loss, which is needed for the growth of the subsequent crops. If the PRESSPACK is used with the TERRALAND TO chisel plough, you can till...