Plough
92Pages

{{requestButtons}}

Catalog excerpts

Plough - 2

5 Plough At BELLOTA Agrisolutions we build spare parts for the most important brands of agricultural tools, such as Kverneland plough, Kuhn mouldboard plough, Ovlac mouldboards, Castillón plough, as well as Fiskars plough and Vogel & Noot plough, amongst many others. In the area of mouldboard plough we provide mouldboards, agricultural coulters, points, heels, blades and deflectors, as well as reversible and fixed mouldboards. For stubble plough, BELLOTA offers a wide range of parts adaptable to the equipment of the most important manufacturers right down to the BELLOTA mini plough solution...

Open the catalog to page 2
Plough - 3

Benefits: Conserves the internal structure of the land, turning over the soil at 10-15 cm. Characteristics: • Boron steel. • Integral hardening to avoid deformations and rupture. Use: For a proper job, we recommend a working width of 280 mm. The recommended attack angle between the plough (once the tine is fastened) and the ground is about 3°. Avantages: Conserve la structure interne du terrain, en effectuant un travail de retournage entre 10-15 cm. Caracteristiques: • Acier au bore. • Trempe complete qui evite les deformations et ruptures. Utilisations: Pour un travail correct, une largeur...

Open the catalog to page 3
Plough - 4

Reference 1833-2C presents greater tipping curvature than reference 1833-2. / La reference 1833-2C presente une cambrure de retournement plus importante que la Ref. 1833-2 Casting frog / Sep fondu Forged frog / Sep forge Also available forged frog for anchor as required / Un sep forge pour ancre, selon requete, est egalement disponible PLOUGH CHARRUE ■ Bolts on page 95 / Boulons en page 95

Open the catalog to page 4
Plough - 5

I Left / Gauche D Right / Droite E Bolts on page 95 / Boulons en page 95

Open the catalog to page 5
Plough - 6

CHISEL PLOUGH ASSEMBLY ENSEMBLE CHARRUE CHISEL 1424 Screw kit breakdown / Detail du kit de vis PLOUGH CHARRUE

Open the catalog to page 6
Plough - 7

POINTS FOR PLOUGHSHARES POINTES POUR SOCS DE CHARRUES Benefits: • Increases porosity and water retention capacity • Buries organic waste, weeds and parasites. Characteristics: • Manufacture of parts in various steels and characteristics depending on requirements and product type. • Boron steel • Three-layer material with different layer specifications and hardness values • Steel with hardened outer layers by means of complete thermo-chemical and heat processes. The process exceeds 40 hours and achieves a uniform layer of 60/65 HRc. • Union of base material with tungsten carbide plates with...

Open the catalog to page 7
Plough - 8

S.A.iWithout holes / S.A.:Sans pergage S.A.iWithout holes / S.A.:Sans pergage S.A.:Without holes / S.A.:Sans pergage S.A.:Without holes / S.A.:Sans pergage PLOUGH CHARRUE D Articles manufactured upon order / Fabrication de l'article sur commande

Open the catalog to page 8
Plough - 9

PLOUGHSHARES SOCS DE CHARRUES 1322 S.A.:Without holes / S.A.:Sans pergage S.A.:Without holes / S.A.:Sans pergage I Left / Gauche D Right / Droite E Bolts on page 95 / Boulons en page 95 D Articles manufactured upon order / Fabrication de l'article sur commande

Open the catalog to page 9
Plough - 10

S.A.:Without holes / S.A.:Sans pergage S.A.:Without holes / S.A.:Sans pergage T: countersunk screw with set screw / T : vis a tete fraisee avec goujon prisonnier 1343-14 A: curved back / 1343-14 A: dos courbe 1343-14: straight back / 1343-14: dos droit PLOUGH CHARRUE

Open the catalog to page 10
Plough - 11

PLOUGHSHARES SOCS DE CHARRUES A STD: Without treatment / STD: Sans traitement I Left / Gauche D Right / Droite E Bolts on page 95 / Boulons en page 95 D Articles manufactured upon order / Fabrication de l'article sur commande For share 1348-CA3. See page 122 / Pour soc 1348-CA3. Voir page 122 For share 1367. See page 122 / Pour soc 1367. Voir page 122

Open the catalog to page 11
Plough - 13

SEMI: Without holes and treatment for drilling as required. / SEMI: Sont servis sans pergage et sans traitement afin de faciliter le pergage. I Left / Gauche D Right / Droite E Bolts on page 95 / Boulons en page 95 D Articles manufactured upon order / Fabrication de l'article sur commande

Open the catalog to page 13
Plough - 14

SEMI: Without holes and treatment for drilling as required. / SEMI: Sont servis sans pergage et sans traitement afin de faciliter le pergage. PLOUGH CHARRUE

Open the catalog to page 14
Plough - 15

I Left / Gauche D Right / Droite E Bolts on page 95 / Boulons en page 95 D Articles manufactured upon order / Fabrication de l'article sur commande

Open the catalog to page 15
Plough - 16

PLOUGH LEAF SPRINGS RESSORTS A LAMES POUR CHARRUE Characteristics: • Special, high elasticity steel with high capacity to recover initial geometry. • Specific integral heat treatment that provides each leaf with optimum characteristics. • The sheets are individually shot-blasted and painted before the set is assembled. • Epoxy paint with UVA protection. Caracteristiques: • Acier special d'une grande elasticity et pouvoir de recuperation de la geometrie initiale. • Traitement thermique integral specifique qui apporte a chaque lame les caracteristiques optimales. • Lames sablees et peintes...

Open the catalog to page 16
Plough - 17

KVERNELAND KVERNELAND KVERNELAND 1,3,5 1365 Fits all Kverneland models. / Monte toutes les machines Kverneland. CG: Big box / CG: Grande boTte CT: With bolts / CT: Avec boulons CP DURATOP: Point with tungsten carbide / CP DURATOP: Pointe avec carbure de tungstene

Open the catalog to page 17
Plough - 18

BO: Boro Steel / BO: Acier au bore TX: Triplex Steel / TX: Acier triplex P: Polished / P: Polie BO: Boro Steel / BO: Acier au bore TX: Triplex Steel / TX: Acier triplex Fits in all Kverneland models except Ecomat. / Monte toutes les machines Kverneland sauf Ecomat. PLOUGH CHARRUE

Open the catalog to page 18
Plough - 19

KVERNELAND KVERNELAND KVERNELAND 1,3,5 1860 I Left / Gauche D Right / Droite E Bolts on page 95 / Boulons en page 95 D Articles manufactured upon order / Fabrication de l'article sur commande

Open the catalog to page 19
Plough - 20

Fits in all Kverneland models except Ecomat and 28. / Monte toutes les machines Kverneland sauf Ecomat et 28. Fits in all Kverneland models except Ecomat. / Monte toutes les machines Kverneland sauf Ecomat. Fits all Kverneland models. / Monte toutes les machines Kverneland. More models. See page 132 / Plus modeles. Voir page 132 CP DURATOP: Point with tungsten carbide / CP DURATOP: Pointe avec carbure de tungstene Fits in Kverneland 6,7,8,9 / 28 and Ecomat / Monte machine Kverneland 6,7,8,9 / 28 et Ecomat PLOUGH CHARRUE

Open the catalog to page 20

All Bellota Agrisolutions catalogs and technical brochures

  1. Disc Harrow

    16 Pages

  2. UltraFORM

    6 Pages

  3. BELLOTA

    222 Pages