BL 105
8Pages

BL 105 0 STARTING AND STOPPING THE MACHINE 0 OPERATING AND REGULATING THE MACHINE 0 MAINTENANCE 0 WARRANTY 0 TESTS FOR CE CERTIFICATION CONTENTS 0 INTRODUCTION 0 LIST OF MACHINE PARTS 0 TECHNICAL DATA 0 PACKING AND TRANSPORT 0 SAFETY RULES AND LIMITS ON USE INTRODUCTION 0 Thank you for having selected our product. We would like to welcome you among our many customers. 0 We are certain that you will appreciate the performance and the operating ease of this machine. 0 Our wide experience in the sector, the use of top grade materials and the high quality production ensure the flawless...

TECHNICAL DETAILS For the engine features, see the engine instruction booklet delivered with the machine. TRANSMISSION : Oil bath gearcase with bevel gear pairs to transmit movement to cutters rotor. Speed in Km/h and cutters rpm The engine fitted on this cultivator have exhaust guard and recoil starter. MOTOR-HOE GENERAL FEATURES 1 - Transmission : 2 forward speed + 1 reverse speed - oil type SAE 30 - oil quantity 0,8. Kg. 2 - Gear lever fitted on handle 3 - Motor electric fitted on handle 4 - Standard handlebar with vertical and side adjustment 5 - The spur is adjustable. 6 - Diesel...

BL 105 PACKING AND TRANSPORT 0 WIDTH: 87 cm. 0 HEIGHT: 50 cm. 0 LENGTH: 72 cm. -PICT. n°2-• Remove the power hoe from its packing • Accurately clean cutters hubs and cutters supporting shaft applying a small quantity of grease in order to make assembly and future removal easier. • Fit the two cutters blades with the dust protection ring on the cutters supporting shaft, then insert cutters blades in second and third position along the length of 90 cm or 120 cm. • Pay attention to cutters blades cutting edge direction, as there is a right side and a left side for any position. • Insert side...

STARTING AND STOPPING THE MACHINE Please check the engine USE AND MAINTENANCE concerning the “operations before staring”. STARTING ENGINE Starting the engine of the machine always follow these instructions very carefully: • only in version 4 stroke Check the oil in the engine : THE BRAND NEW MACHINE IS DELIVERED WITHOUT OIL IN THE ENGINE, THEREFORE YOU SHOULD FILL IT UP TO THE LEVEL ON THE DIP STICK OF THE OIL CUP. • Start the engine only in open spaces. • Check that there is fuel in the tank, and add it if necessary. • Ensure that the gear engagement lever is neutral. Keep your feet away...

S.p.A. BL 105 • In the type with full side and vertical adjustment you have to release the blocking lever Ref. “H” PICT. 7. • lock lever in the handlebar position as you prefer. • The spur can be adjusted in height unscrewing the screw Ref. “I” PICT. 8, and positioning it in the desired point, then the screw can be retightened. It is possible to overturn the spur to increase friction with the ground. 1. ADJUSTMENT FOR HARD GROUND: unloose the screw “I” and lift the spur in order to move the weight of the motor hoe backward. 2. ADJUSTMENT FOR SOFT GROUND: unloose the screw “I” and lower the...

WARRANTY Our machines and accessories are guaranteed for 2 YEARS excluding electric and rubber parts. All the defective parts will be replaced free of charge excluding cost of labour and transport fees which would be at customer’s charge. For any problem regarding the engine or any other part not of our production please refer to the guarantee conditions stated by the manufacturer and apply to their assistance centres. For any kind of problem or repair please apply to the dealer where you bought the machine. TESTS FOR CE CERTIFICATION EC Certificate of conformity in accordance with the...