BL 6000
8Pages

INSTRUCTION MANUAL

Dear user, we thank you for preferring a BENASSI product. We are confident that the top performance and the easy use of our machine will satisfy you. This machine is the result of a long experience working at the top quality standard and using first quality material. Carefully using and servicing this machine, you will certainly get satisfactory performances for a long time. Please read very carefully this booklet before using your tiller. Pay special attention to the instructions marked out by the following sign: SAFETY RULES ...

1‐ Transport wheel 2‐ Engine oil cap 3‐ Tillers 4‐ Tiller protection 5‐ Braking spur 6‐ Belt cover 7‐ Gear lever 8‐ Clutch lever 9‐ Throttle lever 10‐ Handlebar adjustment 11‐ Fuel tank cap 12‐ Handle 13‐ Recoil starter 14‐ Choke lever 15‐ Air cleaner Exhaust guard Recoil starter ENGINE LUBRICATION: see the owner’s manual of the engine Engine oil quantity: see the owner’s manual of the engine Engine fuel: unleaded petrol Safety device for both forward and backward gear stopping the tiller. • The gear has got two forward speeds and one reverse, a belt joins ...

Take the machine out of the carton box. Fit the two tilling units to the main shaft using the delivered pins already assembled on the tilling units. Fit the arm with spur in its place using the delivered pin. Fix the handlebar to the handlebar support using the parts already assembled on the handlebar support itself. The small wheel holder is fitted to the frame by means of a screw nut and a splint pin. Fit the two guard‐extensions to the main tiller protections fitted on the body of the machine using the proper screws and nuts. The protection guards should reach a width ...

STARTING AND STOPPING Whenever you are starting the engine of the machine, follow these instructions very carefully: • Check the engine oil level: A BRAND NEW MACHINE IS DELIVERED WITHOUT OIL IN THE ENGINE, THEREFORE YOU SHOULD FILL IT UP TO THE LEVEL ON THE DIP STICK OF THE OIL CUP. • Please read carefully on the booklet the ENGINE USE AND MAINTENANCE concerning the “operations before starting”. • Start the engine only in open spaces. Lever (“A”) pulled: to get the lever working release the safety device (“B”), now the clutch is engaged (the tiller moves forward or ...

CAUTION: IT IS ADVICED NOT TO KEEP THE MOTOR RUNNING WHEN THE MACHINE IS NOT BEING USED FOR ITS SPECIFICAL PURPOSE. SPUR ADJUSTMENT To get an optimal tilling work and a right advancement of the tiller adjust the spur as shown in picture 8, this adjustment has to be done on both sides of the machine: − Adjustment for hard soils: loosen nut and screw (A) and lift the spur as to shift back the weight of the machine. − Adjustment for soft soils: loosen nut and screw (A) and lower the spur as to move the weight of the machine towards the blades axle. ...

For the usual engine servicing (oil, filter, spark plug and adjustments) read the engine manual delivered with the machine. • It is necessary to check periodically the oil level in the gearbox by at least every 50 working hours. If necessary add MPS SAE 80/90 oil. • The oil has to be changed every 200 working hours. Unscrew the cap (Ref. “B” Pict.10), drain out all the oil letting the cap (Ref. “A” Pict.10) open. Then put back the cap (Ref. “B” Pict.19) and top up with oil (about 1,3 litres). •...

Our machines and accessories are guaranteed for 2 years excluding electric and rubber parts. All the defective parts will be replaced free of charge excluding cost of labour and transport fees which would be at customer’s charge. For any problem regarding the engine or any other part not of our production please refer to the guarantee conditions stated by the manufacturer and apply to their assistance centres. For any kind of problem or repair please apply to the dealer where you bought the machine.