F 1900
8Pages

OPERATION AND MAINTENANCE MANUAL SERIES POWER MOWER

CONTENTS ♦ INTRODUCTION ♦ LIST OF MACHINE PARTS ♦ IDENTIFICATION AND TECHNICAL CHARACTERISTICS ♦ PACKING AND TRANSPORT ♦ SAFETY RULES AND LIMITS ON USE ♦ STARTING AND STOPPING THE MACHINE ♦ SAFETY DEVICE FOR STOPPING MOTOR ♦ OPERATING AND REGULATING THE MACHINE ♦ MAINTENANCE ♦ WARRANTY ♦ SAFETY TESTS AND CERTIFICATION ♦ Thank you for having selected our product. We would like to welcome you among our many customers. ♦ We are certain that you will appreciate the performance and the operating ease of this machine. ♦ Our wide experience in the sector, the use of top grade materials and the...

F 1900 IDENTIFICATION AND TECHNICAL CHARACTERISTICS For the engine features see the engine instruction booklet delivered with the machine. -Picture 2- • Motor fuel: unleaded petrol • Complete with self-winding start-up device • safety device on handles to stop machine • Dry air filter • Consumption at 3600 r.p.m.: 0.8 Kg/hour • MOTOR OIL: AGIP DIESEL SIGMA SAE 30 • Oil quantity in motor: 0.6 l • Gearbox: oil bath single gear • GEARBOX OIL: AGIP ROTRA MP SAE 80W/90 • Oil quantity in gearbox : 0.5 Kg. • Manually controlled wheel release and cutting bar • Steering handles mounted on...

F 1900 PACKING AND TRANSPORT 0 WIDTH: 100 cm 0 DEPTH: 47 cm 0 HEIGHT: 63 cm ^ Remove the power mower from its packing. ^ Fix the handles to the handlebar support using the two screws and two knobs pre-mounted on the handle. Make sure to position the control cables correctly. ^ Fix the bar to the machine, by unspitting the spring (Picture 9 Ref. A) on the pin Ref. B. Thread the pin in the casing Ref. C and thread the spring again (Ref. A). Take the little plastic cylinder (Picture 9 Ref. D), threat it in the grass divider head Ref. E and threat all in the pin of the lever arm Ref. F,...

S.p.A. • Every time you get ready to start the motor, check that the button "f" Fig. 6 is pressed, keeping both the "MOTOR STOP" lever and the clutch lever blocked. • Before you start to mow, check that the motor shuts off with the "STOP" lever raised. MOTOR STOP: lever "e" is squeezed; MOTOR START : lever "e" is lowered > To stop the advancement, release the lever Ref "B" Picture 6. > To stop the mowing bar, release the lever Ref "C" Picture 6. > Caution! Do not non operate the wheel engage lever (Picture 6 Ref."B") and the wheel release lever (Picture 6 Ref."D") at the same time. OPERA...

For changing the oil and other maintenance operations on the motor (spark plugs, air filter, regulations), refer to the motor manual provided. NB: To unscrew the oil drain plug of the motor, disassemble the rear cover (Fig. 8 Ref. B). Make a regular check of the oil level in the gearbox with the cap (Fig. 5 Ref. A) and topping up if necessary. Change the oil completely every 200 hours. Empty the gearbox of oil by unscrewing the oil drain plug (Fig. 5 Ref. C) Let the oil drain completely. After screwing back the cap tightly, fill to the correct level with new oil recommended by the...

Declaration of CE conformity in accordance with the directive 98/37 CE and the directive EMC 89/336/CE S.p.A. Via Lampedusa n°1 - 40017 San Matteo della Decima BO Italy We hereby declare that the machine complies with the essential requirements for health and safety in accordance with Directive 98/37/CE. POWER MOWER TYPE MODEL F 1900 H - F 1900 B For verification of the conformity with the above-mentioned Directives reference has been made to following specifications: UNI EN ISO 12100-1 and UNI EN ISO 12100-2; UNI EN 12733 for pushed motor mowers with rotating cutting blades or with...

S.p.A. VIA LAMPEDUSA 1 40017 S. MATTEO DELLA DECIMA (BO) - ITALY www.benassispa.it e-mail export@benassispa.it TEL. +39/051/820534 TELEFAX +39/051/820526 Dealer stamp