MC 4300
22Pages

REVERSIBLE TWO-WHEEL TRACTOR MC 3300 MC 4300 SERIES Operation and Maintenance Manual

OPERATION AND MAINTENANCE MANUAL Contents General details _________________________________________________________________________________ 3 Introduction ____________________________________________________________________________________ 3 Information about the guarantee ____________________________________________________________________ 3 Training _______________________________________________________________________________________ 4 Key of symbols _________________________________________________________________________________ 4 Read immediately:...

BENASSF OPERATION AND MAINTENANCE MANUAL This manual has been written by the Industrial Engineer Mr CIAVAGLIA Sergio Global Service Italia Srl - 63029 Servigliano (ITALIA) Introduction Dear Customer, this manual has been written thanks to the considerable experience we have acquired so far. Its purpose is to help you in operating the machine properly during all the phases of its life. The manual should be kept with the machine, in a safe place, accessible to all those who need to consult it. Those who have not read, understood and learned the instructions of this manual must not operate the...

BENASSr OPERATION AND MAINTENANCE MANUAL Training If this REVERSIBLE TWO-WHEEL TRACTOR is used in a firm, we remind you that, before using it, all those who will drive it must be informed about the conditions of use and cautioned against unsafe practice. This manual contains all such information, and through it you can obtain the best performance of the machine. For a non-professional use, the retailer must train the user. Any Information and Training should be written down in this table. Table 1 - Information and Training To allow you better understand this manual, we will explain here...

OPERATION AND MAINTENANCE MANUAL Read immediately: BEFORE: ⇒ HANDLING THE MACHINE; ⇒ USING THE MACHINE; ⇒ ADJUSTING; ⇒ CLEANING; ⇒ OPERATIONS OF MAINTENANCE READ THE OPERATION MANUALS (MACHINE AND ENGINE) IF THE REVERSIBLE TWO-WHEEL TRACTOR IS USED IN A FIRM, WE REMIND YOU TO HAND IN A COPY OF THE MANUALS TO THE MAINTENANCE MANAGER. THE MAINTENANCE MANAGER MUST HAND IN AN ABSTRACT OF THE MANUALS TO THE WORKER IN CHARGE OF THE MACHINE, SPECIFYING THE INFORMATION ABOUT HIS TASKS. Operation The REVERSIBLE TWO-WHEEL TRACTOR MC3300 – MC4300 SERIES, hereinafter called machine, is designed to be...

BENASSI OPERATION AND MAINTENANCE MANUAL Machine description The two-wheel tractor is build on a metal frame where the other parts are fixed: the engine, the gear, the axle and the steering handle, as you can see from the picture: BENASSI OPERATION AND MAINTENANCE MANUAL Hand throttle control Differential lock controls Attachment: cutters with protective case Clutch and motor-stop controls Gear levers control Self-winding starter rope Picture 1 - General view Table 2 - Specifications and performance TILLING VERSION

OPERATION AND MAINTENANCE MANUAL Implements The machine can be operated as well with the following implements: SICKLE BAR, PLOUGH, MOWER, SNOW THROWER, TRAILER, SHREDDER, REVERSIBLE PLOUGH, LEVELLING BLADE, ROTARY SWEEPER. For other implements, please get in touch with the producing firm. To attach and use the different implements, refer to the specific manual. Remark on attaching implements When attaching implements, you should follow the following instructions. operation to be performed while the machine is switched off and well stable; operation to be performed only by trained and...

OPERATION AND MAINTENANCE MANUAL Description of controls Warning lights Ignition key (for those models who have it) Motor-stop lever Handle height adjustment lever Hand throttle control Clutch lever Button to lock clutch lever and motor-stop lever Button to lock differential lever Lever to lock differential Speed direction lever (reverser) Gear lever Lever to engage/disengage power takeoff Functions of warning lights Picture 3 - Description of controls

OPERATION AND MAINTENANCE MANUAL Version of the machine with cutters In this version the machine has cutters to till the soil. The external parts of the cutters and of the protective case can be disassembled, so you can vary the width of the machine. The widths you can obtain are as follows. CUTTER WIDTH (mm) LARGHEZZA (mm) Hoeshaped cutters Picture 4 – Machine: version with cutters To assemble the implements, consult the manuals provided by the producing firm. WHATEVER WIDTH YOU DESIRE, THE CUTTERS MUST BE SET SYMMETRICALLY WITH THE AXE OF THE MACHINE. DANGER OF OVERTURNING AND OF...

OPERATION AND MAINTENANCE MANUAL Reverse of the machine In order to attach different implements, the machine can be reversed by turning the handle 180 degrees, as it is described in this page. OPERATION TO PERFORM WHEN THE MACHINE IS TURNED OFF During these operation: DANGER OF BRUISING AND CRUSHING Before reversing the handle, you need to take away the levers that control the speed direction and the power takeoff. 1 – Take the split pins from the levers 2 – Pull the levers out of their places 3 – Take the levers out of the loops FOR THE REVERSE, THE HANDLE SHOULD ONLY BE TURNED CLOCKWISE 4...

OPERATION AND MAINTENANCE MANUAL Positions and controls of levers The position of motion lever and the effect obtained by using them depend on the configuration of the machine (normal or reversed). The pictures below show the two different situations. Power takeoff lever Power takeoff can be engaged only with forward speed. To engage takeoff, engage clutch and then push the lever towards the machine. To disengage it, pull the lever towards you. Speed direction lever To drive forward, engage clutch and then push lever towards the machine. To drive backwards, pull the lever towards you. Power...

OPERATION AND MAINTENANCE MANUAL Adjustements The machine can be adjusted in some ways, which are shown as follows. OPERATION TO PERFORM During these operations: WHEN THE MACHINE IS SWITCHED OFF DANGER OF BRUISING AND CRUSHING You can adjust the height of the handle, in order to get a comfortable position, according to the features of the operator. To adjust in height, keep on pressing the lever and with your other hand move the handle to find the position you want. Handle height adjustment lever Once you have found the right position, loose the adjustment lever Picture 8 - Adjustment of...