BERMAD Irrigation 200 Series - Plastic Hydraulic/Electric Control Valves Water Control Solutions

200 Series Plastic Hydraulic/Electric Control Valves for residential, commercial and agricultural irrigation systems. The BERMAD 200 Series plastic control valves are globe pattern (%”-2”) or Angle pattern (1^”-2”). These control valves provide superior hydraulic performance, demonstrating state-of-the-art hydraulics and plastics technology. Features and Benefits ■ Spring Loaded Elastomeric Valve o Self operated oRange of closing springs ■ Plastic Globe/Angle Hydro-Efficient Valve o Unobstructed flow path oSingle moving part o High flow capacity o Highly durable, chemical and cavitation resistant ■...

BERMAD Irrigation Introduction 200 Series Valves The BERMAD 200 Series is a line of plastic hydraulic/electric control valves for residential, commercial and agricultural irrigation systems. This diaphragm actuated hydraulically operated plastic control valve combines simple and reliable construction with good hydraulic performance. These automatic water control valves are designed for vertical or horizontal installation and are available in Globe or Angle patterns in diameter sizes of ¾”-2”. The IR-200 valves are divided into two main types – Hydraulic Valve and Electric Valve. The Electric...

BERMAD Irrigation Principle of Operation Closed Position Open Position Line pressure applied to the control chamber of the Discharging the pressure in the control chamber to valve creates a superior force that changes the valve atmosphere or some other lower pressure zone causes position to close, providing drip tight sealing. the line pressure acting on the seal disc to change the valve position to open. Locked Position When sensed pressure is equal to setting, the pilot shaft moves and blocks both the drain port and the pressure port. This locks the pressure in the control chamber,...

BERMAD Irrigation Principle of Operation 2-Way Solenoid Controlled, Normally Closed (N.C.) OFF Closed Position Open Position The internal restriction continuously allows line pressure into the control chamber. The solenoid controls outflow from the control chamber. When the solenoid is closed it causes pressure to accumulate in the control chamber, therefor forcing the valve to close. Opening the Solenoid releases more flow from the control chamber than the restriction can allow in. This causes the accumulated pressure in the control chamber to drop, enabling the line pressure acting on the plug...

BERMAD Irrigation Product Parts Features, Hydraulic Valve [1] Fastening Bolts & Nuts 6 Stainless Steel bolts and nuts fasten valve cover to body, ensuring quick in-line inspection and service. [2] Valve Cover (Hydraulic Type) Simple and light construction enables quick in-line inspection and service. [2.1] Flow Stem [3] Auxiliary Closing Spring One single spring fully meets valve requirements for operating pressure range, ensuring low opening pressure and secured closing. [4] Seal Disk Assembly (Hydraulic Type) The seal disk assembly includes a flexible, carefully balanced, and peripherally supported...

BERMAD Irrigation Product Parts Features, Electric Valve [1] Fastening Bolts & Nuts 6 Stainless Steel bolts and nuts fasten valve cover to body, ensuring quick in-line inspection and service. [2] Valve Cover (Electric Type) Simple and light construction enables quick in-line inspection and service. [2.1] 2-Way Solenoid Actuator [2.2] Manual Override Handle [2.3] Needle - Restricts inlet flow & eliminates internal restriction clogging. [2.4] Flow Stem [3] Auxiliary Closing Spring One single spring fully meets valve requirements for operating pressure range, ensuring low opening pressure and secured...

Technical Data 200 Series Dimensions & Weights Pattern * Without flow control handle "Control Chamber Displacement Volume (liter) Technical Specifications Available Patterns and Sizes: Globe: DN: 20, 25, 40 & 50 Angle: DN: 40 & 50 Available End Connections: BSP-T; NPT female threads Pressure Rating: 10 bar Operating Pressure Range: 0.7-10 bar Standard Materials: ■ Body and Cover: Nylon Reinforced ■ Metal Parts: Stainless Steel ■ Diaphragm: NBR [Buna-N] ■ Seals: NBR [Buna-N] ■ Spring: Stainless Steel ■ Cover bolts: Stainless Steel

Technical Data USDimensions & Weights Pattern * Without flow control handle "Control Chamber Displacement Volume (gallons) Technical Specifications Available Patterns and Sizes: Globe: %", 1", 1y2", 2" Angle: 1 y2”, 2” Available End Connections: BSP-T; NPT female threads Pressure Rating: 150 psi Operating Pressure Range: 10-150 psi Standard Materials: ■ Body and Cover: Nylon Reinforced ■ Metal Parts: Stainless Steel ■ Diaphragm: NBR [Buna-N] ■ Seals: NBR [Buna-N] ■ Spring: Stainless Steel ■ Cover bolts: Stainless Steel

BERMAD Irrigation Control Circuit Options Most engineers are familiar with defining control valves Main Features (Pressure Reducing, Pressure Sustaining, Pressure Reducing & Sustaining and etc.) Additional Features (Solenoid Controlled, Remote Hydraulic Control and etc.), as well as selecting the right application for Irrigation Project requirements. The items below provide additional information for selecting the suitable control circuit type: # 2-Way # 3-Way # 2/3 Way (Servo). Consider the information below as a guide when selecting the control circuit type: Use when very accurate control is...

PC-20-A-P, Plastic - 2-Way Pressure Reducing Pilot Valve This pilot integrates all principal functions of a 2-Way control circuit into a single assembly. It is a direct acting pilot valve, actuated by a pressure responsive diaphragm, which seeks to reach equilibrium between hydraulic and set spring forces. When used in a pressure reducing circuit, the pilot modulates to the closed position as downstream pressure rises above set point. An internal restriction acts as an upstream flow restrictor. Connections 1 or 2 - Downstream / Remote sensing 3 - Valve control chamber 4 - Upstream * Other spring...