Catalogs >
Bermad C.S >
IR-420-bKZ

IR-420-bKZ
2Pages

Catalog excerpts

BERMAD Irrigation 400 Series Pressure Reducing Drip-Tape Pressure Reducing Valve For Drip-Tape Applications IR-420-bKZ The BERMAD Pressure Reducing Valve is a hydraulically operated, diaphragm actuated control valve that reduces higher upstream pressure to very low and stable preset downstream pressure regardless of fluctuating demand, or varying upstream pressure. Line Pressure Driven Pressure Reducing Valve Protects downstream pressure Pressure Reducing Servo Pilot Controlled ❏ Dynamic integrated needle valve ❏ Settable to 0.5 bar; 7 psi ❏ Very low hysteresis Advanced Globe Hydro-Efficient Design ❏ Unobstructed flow path ❏ Single moving part ❏ High flow capacity Fully Supported & Balanced Diaphragm ❏ Requires low actuation pressure ❏ Excellent low flow regulation performance ❏ Progressively restrains valve closing ❏ Prevents diaphragm distortion User-Friendly Design ❏ Easy pressure setting ❏ Simple in-line inspection and service ❏ Drip-Tape Systems Low Set Pressure Applications Pressure Reducing Stations Low Supplied Pressure Irrigation Systems [1] BERMAD Model IR-420-bKZ establishes reduced pressure zone protecting laterals and distribution line. [2] BERMAD Automatic Metering Valve Model IR-90

Open the catalog to page 1

For full technical details, refer to Engineering Section. Pressure Reducing Drip-Tape Flow Chart DN Inch mm Lg inch mm La inch mm H inch mm C inch mm h inch mm A; B inch Weight Kg Ib. Angle Threaded Globe Threaded Pattern Connections ∆P 2-Way Circuit "Added Head Loss", bar (for "V" below 2 m/s; 6.5 f/s): 0.3 bar; 4.5 psi 1.0 0.8 Technical Speciﬁcations Technical Data End connections: 1½” DN40 Size Threaded Flanged Grooved Globe Angle Globe Angle Globe Angle Pressure Rating: 10 bar; 145 psi Operating Pressure Range: 0.5-10 bar; 7-145 psi For lower pressure requirements, consult factory...

Open the catalog to page 2