BERMAD Irrigation Hydrometer & Auto Metering Valves 1½" - 10" IR-900 Series Hydrometer The BERMAD IR-900 Series Hydrometer is a unique product integrating both a vertical turbine Woltman-type water meter and a diaphragm actuated control valve. The flow metering unit is vertical to the pipeline and includes an impeller with integrated inlet and outlet flow straighteners, eliminating the need for straightening distances, enabling vertical installation, and ensuring accuracy during control tasks. The raised seal seat results in remarkable cavitation resistance due to the valve body’s distance from the flow. IR-900 provides the full spectrum of metering functions – from simple visual readout, through non-computerized dose control, to pulse output for computerized data capture and control - while simultaneously allowing for numerous control valve features such as pressure, level and flow control. IR-900 Series range in diameter sizes of 1½"-10". Integrated "All-in-One" Control Valve { Saves space, cost and maintenance Hydraulically Controlled Hydrometer { Line pressure driven Magnetic Drive Register: { Analog rotating hands display • Water-free gear train mechanism • Various pulse combinations Typical Applications Internal Inlet & Outlet Flow Straighteners { Saves on straightening distances of pipe { Maintains accuracy Integrated Flow Metering Calibration Device { Precise measurement User-Friendly Design { Simple in-line inspection and service Computerized Irrigation Systems { Irrigation Control Head { In-Field Control Head Remote Flow Data Read-Out { Flow Monitoring & Leakage Control { Water Treatment Systems { Volumetric Irr

BERMAD Irrigation Hydrometer Open Hydrometer Closed Technical Data Solenoid Open Hydrometer Closed Hydrometer Open Hydrometer Closed Solenoid Closed Hydrometer Open On/Off Modes, Solenoid Controlled Line pressure is applied to the control chamber of the hydrometer, through the override Cock-Valve. This creates a hydraulic force that moves the valve to the closed position and provides drip tight sealing. Discharging pressure from the control chamber to the atmosphere causes the line pressure under the plug to open the hydrometer, measuring the flow rate. Line pressure is applied to the control...

BERMAD Irrigation Technical Data Globe Pattern Connection Type DN Size inch LM L W H R Weight (Kg) Globe Pattern Connection Type Size 90° Angle Pattern Connection Type Size Available Patterns, Size & End Connections W Connection Type Size Threaded Threaded (Male) Flanged Flange Inlet \ Thread Outlet Technical Data Connections Standard: Flanged: ISO 7005-2 (PN10 & 16) Threaded: Rp ISO 7/1 BSP.P or NPT Operating Pressure Ranges: PN16: 0.7-16 bar For lower pressure requirements, consult factory Temperature: Water up to 50°C

BERMAD Irrigation Ordering Guide Control Categories Hydrometer with Magnetic Drive & Magnetic Register Command * Globe only Primary Features Additional Features Basic Basic Low Pressure Water Meter Solenoid Controlled Valve Electronic Control Valve Pressure Reducing Valve Pressure Reducing & Sustaining Valve Flow Control Valve, Constant Downstream Pressure Pressure Sustaining Valve Level Control Valve Level Control - Low Pressure Level Control & Pressure Sustaining Valve Level & Flow Control Flow Control Valve Flow Control & Pressure Reducing Control Valve Flow Control & Pressure Sustaining Control...

BERMAD Irrigation Ordering Guide Coating Polyester Green RAL 6017 Pulse Type Other coatings available on request. Voltage-Main Valve Position (When Solenoid De-Energized) 24VAC, with - Normally Closed Diode (D) 24VAC, with - Normally Open Diode (D) 24VAC - Last Position 24VAC, with - Normally Closed Ring (R) 24VAC, with - Normally Open Ring (R) 24VDC - Normally Closed 24VDC - Normally Open 24VDC - Last Position 12VDC - Normally Closed 12VDC - Normally Open 12VDC - Last Position 12VDC - Latch Solenoid S-985 (3 Leads) 12VDC - Latch Solenoid S-982 (2 Leads) 9VDC - Latch Solenoid Reed Switch 1 Pulse...