M10
12Pages

BERMAD Meters Merging monitoring & control Lightweight Composite Electromagnetic flowmeter M10

BERMAD Meters M10 Sensor M10 is an electromagnetic flow meter grooved sensor that covers all diameters from DN50 to DN150. When high accuracy, light weight, and compact dimensions are required, the choice of sensors cannot be other than M10. These performances allow to measure low flow rates precisely and repeatable, even in difficult/ problematic applications with solid parts. The M10 sensor series bases its operation on the Faraday Principle, by which a conductor crossing a magnetic field generates an electrical potential perpendicular to the field itself. On the top and on the lower side...

The electromagnetic flowmeter designed for the toughest applications DS401-1-ENG

BERMAD Meters Body and flanges The M10 have a flow tube made from composite material. It is equipped with an integrated converter. The degree of protection is IP68. It may be installed between flanges up to PN 16 or ANSI 150. The sensor is grooved and can easily fit to all type of end connections with the preferred adaptor. Internal lining The sensor body is in composite, thus the temperature of the liquid to be measured has to be between 0°C and + 80°C. Electrodes and grounding The M10 has three electrodes in AISI 316L and, on request, they can be supplied in other materials. It should be...

Installation with no upstream and downstream distances The M10 internal part of the sensor, allows an optimized and accelerated flow profile which permits to install the sensor in any kind of condition; no need to have straight sections/segments of pipes upstream and downstream. This U0-D0 condition enables to have an Standards reference The M10 electromagnetic meters are marked CE and are manufactured according to the following standards: • 2014/53/EU • 2014/30/EU - EN 61326-1:2013 (EMC) • 2014/65/EU • EN IEC 60529 • OIML R49-1:2013 • European directive 2014/32/EU (MID) extreme flexibility...

BERMAD Meters • District metering of portable water • Grooved connection - fits all applications • ong lasting stability and precision, no filter needed, L • Leak detection and monitoring • Installation of small places without straight distances • Fiscal measures, custody transfer • Applications with very low / high flow rate zero maintenance • Lightweight sturdy structure • ccurate measure at high flow rate and at low flow A rates • i-directional measure B • nternal parts protected by a bi-component resin in I order to increase protection from external agents • Wide

Technical features M10 FEATURES Integral Flow meter Nominal Pressure Process Connection Fluid Conductivity Process Temperature Range Materials in contact with water Flow tube: Glass fibre reinforced plastic Electrodes: AISI316L Power supply Battery Powered: 3.6 V Lithium Battery Mains Powered: 12Vdc (10.8 ÷ 13.2V), max 100mA 2 passive outputs (1 programmable), SSR Type (dry contact), galvanically insulated Max. load +/- 35VDC, 100 mA protected against short circuits, minimum pulse duration 5ms. RS458 2 wire /half-duplex Modbus RTU Slave Bluetooth LCD Segment display, with dedicated status...

BERMAD Meters Calibration and maximum error Each sensor is calibrated on an hydraulic test rig equipped with a ISO17025 traceable weighing system. The accuracy is equal to 0.2% ± 2mm/s. The repeatability of the measure is about 0.1%. Bi-directional measure. On request the M10 can be supplied certified MID OIML R49 for custody transfer. Flow rates chart Sensor diameter Maximum Permissible Error is within the limits indicated in the following graph: Ø In and Flow [m3/h] Outlet (mm) Min Q1 Trans. Q2 Perm. Q3 Overl. Q4

Overall Dimensions

BERMAD Meters Easy and intuitive interface Everything you need from flowmeter with a blink of an App. In a fast developing and interconnected world, data must be available and exchanged anytime, anywhere. Mag-Net app is the Bermad solution. Chart and retrieve data Ultra low power bluetooth A contactless interface allows The Mag-Net app allow users to users to interact with the view the log file on their smart of more than 10m. from the comfort of your car. Infinite possibilities Smart configuration Consult, analyse, monitor, the Users can easily configure or data directly with your touch...

Features Long-lasting performance Battery powered up to 10 years or 12vdc. U0-D0 Zero upstream and downstream distances (MID-001 OIML R49 certfied). All-in-one Electronic converter integrated in the sensor body, compact and lightweight for easy use. Highly-resistant Reinforced polyamide with Victaulc OGS process connections. Empty pipe detection Empty pipe detection on measuring electodes. Easy management, easy programming Mag-Net app available on App Store and Google Play. Data logging Data automatically stored in the internal Eeprom memory. Up to 100,000 lines of active data-logging....

About BERMAD BERMAD is a leading, privately-owned global and accumulating knowledge and experience company that designs, develops and manufactures in multiple markets and industries. Today, we are tailor-made water & flow management solutions recognized as a pioneer and established world- that include state-of-the-art hydraulic control valves, leading provider of water & flow management air valves and advanced metering solutions. solutions that give our customers the unprecedented operational efficiency, and superior Founded in 1965, we have spent over 50 years quality, durability and...